HP TBD Maintenance And Service Manual page 60

h. Disconnect the display panel cable (5) from the display panel.
i. Remove the display panel.
The display panel is available using the following spare part numbers:
N01953-001: LCD, FHD (1920 × 1080), WLED, antiglare, UWVA, 45 % CG, eDP, slim touchscreen display
panel with narrow bezel and camera privacy cover; typical brightness: 250 nits
N01952-001: LCD, FHD (1920 × 1080), WLED, antiglare, UWVA, 45 % CG, eDP, slim non-touchscreen
display panel with narrow bezel and camera privacy cover; typical brightness: 250 nits
N01955-001: LCD, HD (1366 × 768), LED, antiglare, SVA, 45 % CG, eDP 1.2 without PSR, flat
touchscreen display panel with narrow bezel and camera privacy cover; typical brightness: 250 nits
N01954-001: LCD, HD (1366 × 768), LED, antiglare, SVA, 45 % CG, eDP 1.2 without PSR, flat non­
touchscreen display panel with narrow bezel and camera privacy cover; typical brightness: 250 nits
19. If you need to remove the webcam/microphone module and cable:
a. Remove the display bezel.
b. Remove the display hinges.
c. Remove the display panel.
d. Remove the two Philllips M2.0 × 3.4 screws (1) that secure the display bracket to the display back
cover.
e. Remove the display bracket (2).
The display bracket is included in the Bracket Kit, spare part number N01962-001.
Display assembly 53