12. Troubleshooting
Problem
The computer does
not recognize the
data logger.
No PDF file is gen-
erated.
Unrealistic
mation on the LC
display.
ENTER/
Button
DOWN gives not
response although
pressed.
110
Possible solution
Check whether "USB" is shown on the
data logger after plug in. If so, plug into
an another USB port.
Check whether the usage of USB
mass storage device function on your
computer is enabled.
Check whether data logger has been
recognized by your computer.
Check whether your computer is dis-
playing the data logger as a new mass
storage device.
Check whether data logger is upgrad-
ing the firmware (please refer to "Up-
grade firmware" on page 108).
infor-
Reset the data logger to firmware
(please refer to "Reset to default firm-
ware" on page 109).