VOLTCRAFT DL-210TH SE Operating Instructions Manual page 105

• Activate/deactivate limit pause function by holding and pressing
button ENTER (8) for few seconds.
Once the alarm pause function is activated/deactivated, the
latest measurement is shown in the display.
Recorded values during activated pause function are
shown in the report's graph as usual. However, it is
clearly indicated in the graph when and for how long
the pause function was activated.
When the limit pause function is activated during re-
cording, there will be not any alarm indicator "√" or "X".
LED-alarm status, maximum and Minimum values will
not be updated.
long
press
ENTER
pause
on
long
press
ENTER
pause
off
105