VOLTCRAFT DL-210TH SE Operating Instructions Manual page 88

Record Start
Condition
Stop Style
Start Time
Stop Time
Start Delay
Minutes
88
"CIRCULAR LOGGING": Data logger starts
recording immediately and circularly. The
newest data overwrites the oldest data. It
stops recording/logging once the battery is
depleted or "CIRCULAR LOGGING" has
been replaced by another "RECORD START
CONDITION" during configuration.
Select one of the following options to deter-
mine when data logger ends recording.
"NONE": No stop condition is specified. Data
logger stops recording based on the "RE-
CORD START CONDITION" setting.
"STOP BUTTON": Data logger stops record-
ing after holding button ENTER (8) pressed
for few seconds.
"AFTER PDF CREATED": Data logger stops
recording after PDF report is generated.
Define date and time when to start record-
ing data.
Define date and time when to stop record-
ing data.
Define delay time of immediate start of re-
cording.