VOLTCRAFT DL-210TH SE Operating Instructions Manual page 89

Sampling
Rate
Recording
Time
LED Flash
Interval
Enable
Display
Measurement options - Alarm Setting
3
Configure alarm settings in the "Measurement" tab:
Define how frequent the data logger meas-
ures and records data in "MINUTES" or
"HOURS".
When using the data logger at
extremely
choose a longer sampling rate to
decrease power consumption and
to prolong the battery life.
This value is automatically calculated based
on the sampling rate and cannot be set by
the user.
Select how fast the LED control lights (2,3)
shall flash. Choose an interval of 5, 10, 15,
20, 25 or 30 seconds.
Remove the checkmark from the check box
to turn off the LC display, or check the check-
box to turn on the LC display.
When using the data logger at
extremely
choose a longer sampling rate to
decrease power consumption and
to prolong the battery life.
low temperatures,
low temperatures,
89