JVC CA-NXF3 Instructions Manual page 49

• When a microphone is connected, the
microphone mixing function is automatically
activated.
Display window
These indicators light up when the micro-
phone mixing function is activated.
NOTE
• If you prefer not to use the echo function, you
can cancel it (page 48).
4
Start playback of the desired
source.
• You can select a radio broadcast (page 17),
a loaded disc (page 20), a USB device
(page 21) or other connected external
devices (page 19).
5
Press [VOL +] or [VOL –] repeat-
edly to adjust the overall sound
volume.
• You can also adjust the volume by turning
the [VOLUME] control on the main unit.
6
Press [MIC VOLUME +] or [MIC
VOLUME –] repeatedly to adjust
the microphone volume.
• Sing into the microphone to find the desired
microphone volume.
• Adjustable volume range is from 0 to 15.
• You can also adjust the microphone volume
by turning the [MIC LEVEL] control on the
main unit.
NOTE
• Pressing [MIC VOLUME +] or [MIC VOLUME –]
on the remote control or turning the [MIC
LEVEL] control on the main unit affects the vol-
umes of both microphones connected to the
[MIC 1] and [MIC 2] terminals on the main unit.
• When the microphone mixing function is acti-
vated, the surround mode setting has no effect.
(Refer to page 14.)
• When the microphone mixing function is acti-
vated, you cannot record sound from a CD to a
USB device, delete a track/group from a USB
device or add a title to a track/group on a USB
device. (Refer to pages 52-56.)
• While recording sound from a CD to a USB
device, deleting a track/group from a USB
device or adding a title to a track/group on a
USB device, you cannot activate the microphone
mixing function.
• You cannot record your singing to a USB device.
• Microphone audio cannot be output to an external
device connected to the [DIGITAL OUT] terminal.
• If you activate or deactivate the microphone mix-
ing function while the microphone is connected,
the sound becomes intermittent.
CAUTION
• Before disconnecting a microphone from the
main unit, press [MIC VOLUME –] on the remote
control or turn the [MIC LEVEL] control on the
main unit counterclockwise until "MIC: 0"
appears in the display window.
Activating/deactivating the
microphone mixing function
Press [MIC MIX] to select "MIC MIX" or
"MIC OFF" in the display window.
Display window
NOTE
• If you turn off the main unit and turn it on again
when a microphone is connected, the micro-
phone mixing function is deactivated. To activate
the microphone, press [MIC MIX] to select "MIC
MIX" in the display window.
• When the "SCORING" indicator lights up in the
display window, you cannot deactivate the
microphone mixing function. To cancel the scor-
ing function, refer to page 49.
46