Playing Back A Specified Part Repeatedly (A-B Repeat Playback); Designating The Time (Time Search) - JVC CA-NXF3 Instructions Manual

Using the status bar and the menu bar (continued)
Playing back a specified part
repeatedly (A-B repeat
playback)
You can play back a desired part repeatedly by
specifying a start point (A) and an end point (B).
■When a disc is played back
1
Press [ON SCREEN] twice.
• The menu bar appears. (Refer to page 37.)
2
Press 2 or 3 (cursor) to select
.
3
Press [ENTER].
4
Press 5 or / (cursor) to select "A-
B".
5
Press [ENTER] at the start point of
the part to be repeated (specifying
point A).
• The icon on the menu bar is
6
Press [ENTER] at the end point of
the part to be repeated (specifying
point B).
• The icon on the menu bar is
• The " " and "A-B" indicators light up in the
display window and the part between points
A and B is played back repeatedly.
Canceling A-B repeat playback
There are two methods.
• Press 7.
• Select . (Select
[ENTER] twice.)
NOTE
• You can use A-B repeat playback only within the
same title or track.
• You cannot use A-B repeat playback during pro-
gram playback or random playback.
• To cancel the PBC function for VCD/SVCD, refer
to page 24.
• For some discs, stopping playback may auto-
matically cancel A-B repeat playback.
39
Designating the time (Time
search)
(PBC off)
■When a disc is played back
1
2
3
4
Example:
When you want to play back a DVD VIDEO from
the position of (0 hour) 23 minutes 45 seconds,
press the number buttons in the order of [ 0 ], [ 2 ],
[ 3 ], [ 4 ] and [ 5 ].
.
5
.
NOTE
• This function does not work during program
playback or random playback.
• Time search for a DVD VIDEO is from the begin-
ning of the title.
• Time search for a DVD AUDIO is from the begin-
ning of the track being played back.
• Time search for a VCD, an SVCD and a CD is as
and press
follows:
- When the disc is stopped, time search is from
- When the disc is played back, time search is
• To cancel the PBC function for VCD/SVCD, refer
to page 24.
For the locations of the remote
control buttons, refer to page 31.
Press [ON SCREEN] twice.
• The menu bar appears. (Refer to page 37.)
Press 2 or 3 (cursor) to select
.
Press [ENTER].
Enter the time using the number
buttons.
• You can skip entering the minute and sec-
ond settings.
• If an incorrect value is entered, press 2
(cursor) to delete the value and enter the
correct value.
Press [ENTER].
• To turn off the menu bar, press [ON
SCREEN].
the beginning of the disc.
within the track currently being played back.
(PBC off)