JVC CA-NXF3 Instructions Manual page 15

NOTE
• "480", "576", "720" and "1080" refer to the num-
ber of the scanning lines. Generally, the larger
the number, the better picture that can be
obtained.
• "I" refers to the interlaced format. "P" refers to
the progressive format. A better picture can be
obtained in the progressive format than in the
interlaced format.
• When an HDMI video signal is output, the
"HDMI" indicator lights up in the display window.
• When an HD video signal is output, the "HD"
indicator lights up.
• When "PAL. 576P", "PAL. 720P", "PAL.1080P",
"NT. 480P", "NT. 720P" or "NT.1080P" is
selected, the "PROGRESSIVE" indicator lights
up in the display window.
5
Press [ENTER].
NOTE
• It is recommended that you slide the remote
control mode selector to [AUDIO] after selecting
the video signal type. Most of the other functions
can be used when the remote control mode
selector is at [AUDIO].
• To check the compatibility of your TV, contact
your local JVC customer service center.
• Even if the main unit is turned off, the video sig-
nal type setting is stored.
12