Amplifier Operations; Turning On The Power; Adjusting The Volume - JVC CA-EX90 Instructions Manual

Amplifier Operations

Turning on the Power

Front panel
STANDBY
POWER
Goes out.

Adjusting the Volume

From the front panel
DOWN
From the remote control
VOLUME
20
CA-EX90
Remote control
POWER
VOLUME
UP
Press POWER.
The STANDBY indicator goes out and "HELLO" appears in
the display.
ME-EX90 subuwoofer amplifier also turns on.
• Pressing POWER of RX-EX90 turns on the source
component previously selected.
• Pressing POWER of the other EX90 components (CD
player, etc.) also turns on the amplifier/tuner.
To turn off the power
Press POWER again.
The STANDBY indicator lights up and the display shows
"GOOD-BYE", then turns to the clock.
If you have made the Compu Link connection (page 41):
•Other optional components also turns off.
Rotate VOLUME.
The volume level appears in the display.
• Rotate to the right (UP) to increase the volume, rotate to
the left (DOWN) to decrease the volume.
• Rotate VOLUME quickly to make large changes, rotate
slowly to make small changes.
Press VOLUME
Press to increase the volume, press
volume. Hold down to make a continous change.
• The volume can be set between 0 and 50.
Notes
• The volume cannot be changes while the unit is in the
STANDBY mode.
• Be sure to turn the volume down before setting the unit
to the STANDBY mode.
To mute the sound
Press FADE MUTING.
When you press FADE MUTING, the volume level
decreases to 0 (MUTING). Pressing it again restores the
volume. To raise the volume, press VOLUME
or .
to decrease the
.