Cd Operations; Loading Cds - JVC CA-EX90 Instructions Manual

CD Operations

Loading CDs

The CD player's unique 3 disc changer mechanism houses 3 individual disc trays inside the main tray.
Displayed information
When a CD is loaded, the disc number for that CD is displayed and the player reads the disc's data.
After the data is read, the display shows the total number of tracks and total playing time of the disc,
then switches to show the playing time for the first track.
DISC
DISC
DISC
Likewise, when playback is stopped, the display shows the total number of tracks and total playing
time of the current disc for 4 seconds, then it shows the playing time for track 1.
Tip
When loading more than one CD, instead of closing the main tray, press 0 for the next tray you want
to load, the main tray automatically closes and then reopens to selected disc tray.
CAUTION
The disc tray will close if pushed inward. Be careful not to push the tray inward when placing a CD.
28
CA-EX90
1 Press 0 (open) for the disc tray (CD 1to 3) you
CD 3
CD 2
CD 1
2 Place a CD with the label side facing up.
3 Press the same 0 you pressed in step 1.
want to load.
The main tray opens to the selected disc tray.
The disc tray number and "OPEN" appear in the display.
Example) When CD1 0 is pressed
• The disc trays housed in the main tray are numbered
CD 1, CD 2, and CD 3 starting from the bottom tray.
One touch operation
When the unit is in the STANDBY mode, press one 0 to
automatically turn the power on and open to the
selected tray.
Place CD singles (8 cm) in the depressed inner circle.
The main tray closes.
The disc tray number and "CLOSE" appear in the
display.
Example) When CD 1 0 is pressed
• Repeat steps 1 to 3 to load up to 3 CDs.
Reading data
Total number of tracks and total
playing time (shown for 4 seconds)
Playing time for track 1