Common Operations - JVC FS-8000J Manual

COMPU PLAY
JVC's COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, turn on the radio, or listen to an external equipment with a single press of the play button for
that function. One Touch Operation turns the power on for you, then starts the function you have specified. If the System is not ready (no CD
in place), the System still powers on so you can insert a CD.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Unit
CD 38 button
TUNER BAND button
MD/TAPE button
AUX button
■ ■

Common Operations

REMOTE CONTROL RM-RXFS8000
DIMMER
DIMMER
DISPLAY
DISPLAY
SUBWOOFER
PROGRAM
BASS
TREBLE
/TAPE
VOLUME+,–
Turning the Power On and Off
Turning the System On ——————
Press the POWER button.
The display comes on and the STANDBY indicator goes out.
The System comes on ready to continue in the mode it was in when
the power was last turned off.
■
For example, if the last thing you were doing was listening to a
CD, you are now ready to listen to a CD again. If you wish, you
can change to another source.
■
If you were listening to the Tuner last, the Tuner comes on play-
ing the station it was last set to.
Turning the System Off ——————
Press the POWER button again.
The STANDBY indicator lights up and the display is blank, except
for the clock display.
Downloaded from: https://www.usersmanualguide.com/
On the Remote Control
CD 38
TUNER BAND button
MD/TAPE button
AUX button
SLEEP POWER
POWER
FM MODE AUX
AUTO
LEVEL PRESET CD
RANDOM REPEAT
BASS TREBLE CANCEL
VOLUME
GAIN SELECT
VOLUME GAIN
UP
SELECT
SET
DOWN
BASS
CONTROL
TUNER
MD CD
BAND
POWER
VOLUME
POWER
STANDBY
POWER
STANDBY
button
TIMER/
BASS PRESET
SNOOZE
CONTROL TUNING DOWN MULTI CONTROL UP CLOCK
CLOCK
POWER OPEN/CLOSE
CD
TUNER
AUX MD/TAPE
BAND
VOLUME GAIN SELECTOR
0 dB -6dB -12dB
VOLUME GAIN
SELECTOR
■
Some power is always consumed even though power is turned
off (called Standby Mode).
■
To switch off the System completely, unplug the AC power
cord from the AC outlet. When you unplug the AC power cord,
the clock will be reset to AM 12:00 after about 20 minutes, and
preset Tuner stations will be erased after about 24 hours.
Adjusting the Brightness
(DIMMER)
You can adjust the brightness of the display.
To make the display brighter, press the DIMMER button on
the Remote Control.
To make the display darker, press the DIMMER button on the
Remote Control again.
• The brightness of the volume illumination is also adjusted.
■
In Standby mode, the normal brightness is the same as the dark-
er brightness for the powered System. When you press the DIM-
MER button in Standby mode, the brightness becomes further
darker.
In standby mode, the volume illumination does not light.
STANDBY
VOLUME
indicator
STANDBY
VOLUME
Volume
illumination
ULTRA COMPACT COMPONENT SYSTEM
PHONES
FS-8000
PHONES
6