Table of Contents
Advertisement
speed-control lever is not in the N
the blade-control switch (power takeoff) is engaged.
Blade-Control Switch (PTO)
Use the blade-control switch (PTO), with the OPC
levers pressed against the handles, to engage and
disengage the drive belt to drive the mower blades.
Pull the switch up to engage the blades and push it
down to disengage the blades.
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
, R
FF
Speed-Control Lever
This machine has a variable speed control with a
N
position. This controls how fast the machine
EUTRAL
travels.
Neutral Lock
Squeeze the drive levers back until you feel an
increase in force, then move the locks to rearward to
the N
-L
position.
EUTRAL
OCK
Fuel-Shutoff Valve
Close the fuel-shutoff valve when transporting or
storing the machine.
Choke
Use the choke to start a cold engine.
position or
EUTRAL
, and S
.
UN
TART
Specifications
Note:
Specifications and design are subject to
change without notice.
Width
Length
Height
Weight
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to
www.Toro.com
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
8
89 cm (35 inches)
203 cm (80 inches)
112 cm (44 inches)
231 kg (509 lb)
for a list of all
Advertisement
Table of Contents
