Toro 31914 Operator's Manual page 20

Commercial walk-behind traction unit 18hp pistol-grip hydro drive
Hide thumbs Also See for 31914:
Table of Contents

Advertisement

Figure 16
Changing the Engine Oil
Service Interval: After the first 8 hours—Change the
Every 100 hours—Change the engine oil (more
often in dirty or dusty conditions).
1.
Park the machine so that the drain side is slightly
lower than the opposite side to ensure that the
oil drains completely.
2.
Disengage the PTO and engage the parking
brake.
3.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
4.
Drain the oil from the engine
g307458
5.
Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
18).
20
engine oil.
(Figure
Figure 17
17).
g027476
(Figure

Advertisement

Table of Contents
loading

Table of Contents