Table of Contents
Advertisement
Maintenance
Note:
Determine the left and right sides of the machine from the normal operating position.
Maintenance Safety
•
Before adjusting, cleaning, servicing, or leaving
the machine, do the following:
– Park the machine on a level surface.
– Move the throttle switch to the low-idle position.
– Disengage the cutting units.
– Ensure that the transmission is in neutral.
– Engage the parking brake.
– Shut off the engine and remove the key.
– Wait for all moving parts to stop.
– Allow machine components to cool before
performing maintenance.
•
Do not allow untrained personnel to service the
machine.
•
If the engine must be running to perform a
maintenance adjustment, keep your hands, feet,
clothing, and any parts of the body away from the
cutting unit, attachments, and any moving parts.
Keep bystanders away.
•
Keep all parts in good working condition. Replace
all worn, damaged, or missing parts and decals.
Keep all fasteners tight to ensure that the machine
is in safe working condition.
•
Check the grass catcher components frequently
and replace them when they are worn or damaged.
•
Clean grass and debris from the cutting unit,
drives, muffler, cooling screen, and the engine to
help prevent fires. Clean up oil or fuel spills.
•
Check the brake operation frequently. Adjust and
service the brake as needed.
•
Carefully release pressure from components with
stored energy.
•
To ensure safe, optimal performance of the
machine, use only genuine Toro replacement
parts. Replacement parts made by other
manufacturers could be dangerous, and such use
could void the product warranty.
16
Advertisement
Table of Contents
