Toro 31914 Operator's Manual page 27

Figure 29
1. Yoke
2. Jam nut
3. Speed-control crank
4. Speed-control rod
5. Tabs
6. Move the speed-control lever to the N
position.
7. Ensure that the safety switch is pressed and
there is a 8 mm (5/16 inch) space between the
actuating tab and switch
8. If needed, adjust the switch location to create
the 8 mm (5/16 inch) space
g267691
6. Tabs—3 o'clock position
7. Tabs—6 o'clock position
8. Tabs—9 o'clock position
9. Tabs—12 o'clock position
EUTRAL
(Figure 30).
(Figure 30).
1. Actuating tab
2. 8 mm (5/16 inch) space
27
Figure 30
3. Safety switch
g001517