Belt Maintenance; Inspecting The Belts - Toro 31914 Operator's Manual

Note:
With the parking brake in the disengaged
position, the clearance between the tire and the
flat bar is approximately 6 mm (1/4 inch).
5. Secure the lower link to the lower brake lever
using the hairpin cotter and the clevis pin
41).
6. Check the brake operation again; refer to
Checking the Parking Brake (page

Belt Maintenance

Inspecting the Belts

(Figure
Service Interval: Every 25 hours—Check the belts
Replace the belt if it is worn. The signs of a worn belt
33).
include squealing while the belt is rotating; the blades
slipping while cutting grass; and frayed edges, burn
marks, and cracks on the belt.
34
for wear or cracks.