Status Indicator - Honeywell Sensepoint XCL Installation Manual

Commissioning

3.2 Status Indicator

There is a status indicator on the face of the gas detector. The operating
state of the detector is indicated by one of four colors, either steady or
flashing.
28
All manuals and user guides at all-guides.com
Normal: The indicator is on steady green when the concentration of
the target gas is within normal range.
NOTE
Using the mobile Sensepoint app, you can change how the green
indicator behaves during normal operation. Select between
steady green (default setting), confidence flash every 20 seconds
or off.
7. Remove power and refit the detector
module to the back box.
8. Refit the front cover.
9. Apply power. The Sensepoint XCL will
enter a warm-up mode during which
time the status indicator will be
steady yellow and the output (mA
version) will be held in an inhibited
state.
10. After the warm-up has been
completed, the Sensepoint XCL will
enter it's normal operating state.