Saturn ST-EK8036 Manual page 6

Attaching Lid
Place the handle towards the rear side
of the appliance. Press the hinge lock,
at the same time insert the shaft of the
hinge on the lid into the hinge holder.
Ensure that lid is attached properly.
Close and press on lid until it clicks.
OPERATING THE APPLIANCE FOR
THE FIRST TIME
Wash and rinse the water tank
with clean water.
OPERATING THE APPLIANCE
Filling with water
Place the appliance on a flat and stable
surface, open the lid and fill up the
water tank with water.
Do not fill the water more than the full
line marking. Please
maximum water level marking under
the product descriptions.
appliance is overfilled, it may cause
splashing, which might arise a hazard to
the user.
To close the lid
Carefully close the lid by pressing down
until a click sound is heard.
refer to the
If the
Do not close the lid by force as it may
cause damage.
To power on the appliance
Connect the receptacle to the appliance
first, and then connect the power plug
to the wall outlet.
Do not power on the appliance when the
water tank is empty.
1. Connect the receptacle to the
appliance horizontally.
2. When rotating the product body
after inserting the receptacle, be careful
of the connection and make sure it is
not loosen.
To boil water
When switching on the power, the
"BOIL" light indicator will turn on and
the water will start to boil. After the
boiling process, the "KEEP WARM" light
indicator will be on.
WARNING:
1. Do not open the lid while the
appliance is operating.
2. Do not add or dispense the
water while water is boiling.
3. Do not contact the steam vent.
4. Do not place cloth or any other
items to cover the steam vent.
To dispense hot water
1. Dispense button
Press on the" DISPENSE" button to
dispense hot water.
5