Overmax OV-BaseCore9+ User Manual page 11

8.1 Camera
If the cursor is at
Click to take picture.
Click to set the scene mode, Picture size, Picture quality, and colour effect.
Click to set white balance.
8.2 DV
If the cursor is at
Click to take picture.
Click to set the colour effect or restore to default settings.
9. Connect with external device
9.1. Connect with PC
Connect the device with the PC via the USB cable. The PC appears two new disk
symbols after connected successfully. One is the TF card, and the other is the
built-in flash.
9.2. Use of OTG
It supports the movable device with FAT32 format, such as U disk and MP3.
Connect the movable device to the MID.
9.3. Applications
For convenient usage, we installed some third party software in the MID. For
detailed operation methods, please check the corresponding instruction. Some of
the software may be able to be used in some area because of network service.
IV. Troubleshooting
3. What if the device is abnormal during operation?
Answer: 1) Reboot the device to see if it works OK.
2) Charge the device by the charger to activate the battery. Make sure it has
power before you operate it.
3) It is suggested to upgrade the OS of the device by professional.
4. Why the standby time is so short sometimes?
Answer: the use time of the battery is all depend on the temperature and use
instance. If the temperature is too high or too low, the use time of the battery
might be effected. It is suggest using the device in normal temperature. The using
time is also affected by increased volume and frequently operation.
position, the device is at Camera mode.
position, the device is at DV mode.