Kia EV6 Manual page 383

Hide thumbs Also See for EV6:
Table of Contents

Advertisement

Driving your vehicle
WARNING
Before selecting the Exit Direction, the
driver should check whether the space
for exit is suitable. If the searched exit
space by Remote Smart Parking Assist is
narrow or unsuitable (surrounding vehi-
cles are parked vertically, etc.), do not
use the Smart Exit function.
4. Smart Exit
OCV041201L
A: SMART Exiting
1 1. Take hands off steering wheel.
2 2. Press and hold PARKING button.
1. Press the Parking/View ( ) button
when the vehicle is stopped by
depressing the brake pedal.
僅 When the brake pedal is released,
Remote Smart Parking Assist will
automatically control the steering
wheel, vehicle speed and gearshift.
僅 While Smart Exit function is operat-
ing, if you do not hold down the
Parking/View button, the vehicle
will stop and function control will
pause. The function will start oper-
ating again when the Parking/View
button is pressed and held again.
2. Hold the Parking/View ( ) button
until the vehicle reaches the target
exit location. When the vehicle
reaches the target exit location, a
message will appear on the infotain-
ment system screen to inform you
that exit is complete.
Remote Smart Parking Assist (RSPA)
僅 When the vehicle reaches the tar-
get exit location, a message will
appear on the infotainment system
screen to inform you that exit is
complete.
NOTICE
僅 Smart Exit function will not operate if
the door is open or the seat belt is not
fastened.
僅 Vehicle speed can be adjusted by
depressing the brake pedal while
Smart Exit function is operating. How-
ever, the vehicle does not accelerate
even when the accelerator pedal is
depressed.
僅 If exit is completed while depressing
the brake pedal, Smart Exit function
will complete with the gear in D
(Drive).
僅 If exit is completed while depressing
the accelerator pedal, you must take
your foot off the accelerator pedal
once for the accelerator pedal to
operate.
僅 If there is no vehicle operation such as
depressing the brake pedal or accel-
erator pedal within 4 seconds after
exit is complete, the vehicle will auto-
matically shift to P (Park) and engage
EPB (Electronic Parking Brake).
僅 After Exit function is complete, always
check the surroundings before driv-
ing.
Smart Exit operation status
Operation status
The turn signal of the exit direction blinks
Under control
until the exit is complete or Smart Exit is
canceled.
Turn signal
6
175
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

NiroEv6 2023Niro evNiro sg2 2022

Table of Contents