Kia EV6 Manual page 18

Electric vehicle guide
Energy information
Select EV and see the vehicle image
from the infotainment system screen.
You can check battery discharging level.
How to connect
Outdoor (if equipped)
OCVQ011001L_4
1. Open the cover of the V2L connector.
2. Close the cover after connecting
home appliances and electronic prod-
ucts to the power outlet.
3. Connect the V2L connector to the
charging hole on the vehicle.
4. Press the switch (A) of the V2L con-
nector and check whether the light (B)
is on or off. The light (B) may not turn
on normally when:
僅 See the battery discharging limit for
high voltage battery for driving in
Energy consumption menu on the
screen. If it is higher than the cur-
rent amounts of high voltage bat-
tery, the light (B) does not turn on.
僅 Check whether the light of V2L con-
nector or indoor power outlet turns
on or not.
僅 If the warning message for V2L
appears on the cluster, refer to
2 10
"LCD display messages" on page 2-
11.
僅 If V2L does not operate previously
when you connects another home
appliances, we recommend to visit
an authorized Kia dealer/service
partner.
5. Press the switch (A) to turn off the
light (B) the V2L will be off. You can
disconnect the V2 connector when the
light (B) turns off or the charging door
lock is deactivated pressing the door
unlock button on the smart key.
Indoor (if equipped)
1. Connect to the power outlet located in
bottom of the rear seat with the EV
button in the ON position.
OCVQ011002L
2. Use the mechanical key to unlock the
power outlet cover.
OCVQ011046
EV menu