Page 1
Car Infotainment System Quick Reference Guide...
Page 2
To access the online manual for Car Infotainment System, QR code scan the [ This guide covers specifications for all vehicle models, including optional specifications, and is based on the latest version of system software. [ The design and specification of the system may change without prior notice for performance improvement.
Page 3
Run the desired function on the system and then press User's Manual on Web (QR Code) from the menus on the screen. A Without scanning the QR code, you can directly enter the URL address to see User's Manual on Web. (http://webmanual.kia.com/STD_GEN5_WIDE/AVNT/USA/English/index.html)
Page 4
Safety Warnings Be sure to keep the following instructions. Otherwise, it may cause serious injury or accident. Ý Driving Obey all traffic laws while driving. • Relying solely on the navigation system may cause violation of traffic rules and regulations, resulting in an accident.
Page 5
Safety Precautions Be sure to keep the following instructions. Otherwise, it may cause minor injury or system damage. Operation Ü Ü Use the system with the vehicle started. • When you use the system for a long time with the vehicle stopped, it may cause battery discharge. Do NOT arbitrarily install an unauthorised aftermarket product in your vehicle.
Page 6
Component names and functions Control panel (Infotainment System) POWER button/VOLUME knob • Turn on or off the Radio/Media. • Press and hold the button to turn off the screen and sound. • Turn the knob to adjust the system volume (except for navigation sound). System Reset button •...
Page 7
MAP button • Returns to the current location on the map. • While in guidance on the navigation screen, press to repeat the voice guidance. NAV button • Displays the Navigation Menu screen. • Press and hold the button to display the Places screen. Custom button •...
Page 8
Component names and functions Control panel (Climate control System) POWER button/Driver's seat temperature control knob • Turn the climate control function on or off. • Turn to adjust the driver's seat temperature. FRONT windshield defrost button • Remove frost from front windshield via the climate control system. •...
Page 9
Driver's seat temperature • Displays the driver's seat temperature. DRIVER ONLY mode button • Climate control will be used only for the driver’s seat. Air conditioner button • Turn the air conditioning function on or off. Fan speed button/AUTO mode fan speed •...
Page 10
Steering wheel remote control MODE button • Press the button repeatedly to change the system mode (radio, media, etc.). • Press and hold the button to display the function settings screen. Voice Recognition button • Press to start voice recognition. •...
Page 11
Turning on/off the system Turning on the system Turn on the vehicle. When a safety warning message appears, read it and press Confirm. A To change the display language, press Language. Turning off the system To turn off the system while driving, press and hold the Power button on the panel.
Page 12
Using the infotainment/climate control mode switchable controller Switching between panels Press the switch button on the switchable controller to select a control panel. The selected control panel icon will be activated. A Changing the switch keyboard will illuminate the selected control panel. A You can only turn on the infotainment system when the key ignition switch is placed in the "ACC"...
Page 13
How to Update the Map and Software for your Infotainment System To ensure you are maximizing the full potential of your navigation system, we advise updating the map and software annually. To update, visit the map update website and install the Navigation Updater program onto your PC.
Page 14
• Navigation: Distracted driving can result in a loss of vehicle control. When operating a vehicle, never use a vehicle system that takes your focus away from safe vehicle operation. Navigation is for information purposes only, and Kia does not make any warranties about the accuracy of the information.
Page 15
FCC Certification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 17
Car Infotainment System User's Manual [ This guide covers specifications for all vehicle models, including optional specifications, and is based on the latest version of system software. [ The design and specification of the system may change without prior notice for performance improvement.
Page 18
Available materials for operation Quick Reference Guide Provided in the format of a booklet. It provides brief information of the system, including basic controls and main functions. User's Manual on Web To view related information while using the system, press User's Manual on Web (QR Code) from the menus on the screen.
Page 19
Symbols in this User's Manual Warning Indicates very important information directly related to user safety. Failure to follow instructions may cause serious injury. Caution Indicates important information directly related to user safety. Failure to follow instructions may cause minor injury or vehicle damage or breakdown. Note Indicates helpful information for operation of the product.
Page 20
HEV only Displays only the functions that can be used in a hybrid vehicle. PHEV only Displays only the functions that can be used in a plug-in hybrid vehicle. EV only Displays only the functions that can be used in an electric vehicle.
Page 21
Safety Warnings Be sure to keep the following instructions. Otherwise, it may cause serious injury or accident. Ý Driving Obey all traffic laws while driving. Relying solely on the navigation system may cause violation of traffic rules and regulations, resulting in an accident.
Page 22
Safety Precautions Be sure to keep the following instructions. Otherwise, it may cause minor injury or system damage. Ü Ü Operation Use the system with the vehicle started. When you use the system for a long time with the vehicle stopped, it may cause battery discharge. Do NOT arbitrarily install an unauthorized aftermarket product in your vehicle.
Contents System overview Component names and functions Turning on/off the system Using the touch screen Using the Home screen 1-11 Accessing the All Menus screen 1-15 Using the split screen 1-15 Useful functions Using the First Run Setup Using the phone projection function Viewing the driving assistance screen Using the climate control function 2-14...
Page 24
Using the Electric Vehicle menu 2-30 Using the Electric Vehicle menu (Type1) 2-30 Using the Electric Vehicle menu (Type2) 2-42 Radio Turning on the radio Listening to HD Radio™ 3-11 Listening to SiriusXM™ radio 3-13 Media Using media Navigation Navigation functions Various ways to find routes 5-11 Using saved favorite places...
Page 25
Voice recognition Using the Siri Eyes Free 7-39 Voice Memo 7-40 Kia Connect Kia Connect service Running the Kia Connect menu Route guidance service 8-13 Settings Configuring system settings Configuring the vehicle settings (Type1) Configuring the vehicle settings (Type2) 9-15...
Page 26
Configuring the button settings (Type1) 9-45 Configuring the button settings (Type2) 9-47 Configuring the sound settings (Type1) 9-49 Configuring the sound settings (Type2) 9-53 Configuring the voice recognition settings (Type1) 9-58 Configuring the voice recognition settings (Type2) 9-59 Configuring the navigation settings (Type1) 9-60 Configuring the navigation settings (Type2) 9-65...
Page 27
Wireless Update Wireless update 10-2 Appendix Solutions 11-2 System status indicator icons 11-9 11-12 Product specifications 11-14 Important information 11-19 Index 11-21 Trademarks 11-25 Open Source Information 11-26...
System overview Component names and functions Turning on/off the system Using the touch screen Using the Home screen Accessing the All Menus screen Using the split screen...
A The shape may differ depending on the vehicle model and specifications. For more information, see "Quick Reference Guide" that is separately provided. A For more information about the infotainment / climate control panel, refer to http:// webmanual.kia.com/SwitchableController/index.html. POWER button Turn on or off the Radio/Media.
Page 31
SEEK/ While listening to the radio, change the station. TRACK button While playing media, change the track/file. Press and hold (if equipped) to rewind or fast forward (except for the Bluetooth audio mode). Custom button Runs the user-defined function. Press and hold the button to display the function settings screen.
Page 32
Steering wheel remote control A The shape may differ depending on the vehicle model and specifications. For more information, see "Quick Reference Guide" that is separately provided. Voice Recognition Press to start voice recognition. button Press and hold to start voice recognition of a connected smartphone via phone projection.
Page 33
Option B Call button Before connection of Bluetooth: Press to display the Bluetooth connection window. After connection of Bluetooth: Press to display the recent calls list. To redial the last call number, press and hold the button. When a call comes in: Press to answer a call. End Call button During a Bluetooth call: Press to end a call.
Turning on/off the system The following explains how to turn on or off the system. Before using the system, be sure to read the user's manual for safe and convenient manipulation. Turning on the system Turn on the vehicle. When a safety warning message appears, read it and press Confirm. A To change the display language, press Language.
Page 35
Ý Warning Driving while distracted can result in a loss of vehicle control that may lead to an accident, severe bodily injury, or death. The driver's primary responsibility is the safe and legal operation of the vehicle, and the use of any vehicle systems, including the touch screen and steering wheel controls, which take the driver's eyes, attention, and focus away from the safe operation of the vehicle, or which are not permissible by law, should never be used during the operation of the vehicle.
Using the touch screen This system is equipped with a touch-enabled screen. You can use various practices by using this feature. Ý Warning Do not use the touch screen while driving as this will divert your attention away from the safe operation of the vehicle.
Page 37
"Press and hold" gesture Press and hold the desired item. It is used to fast forward or rewind during playback. "Slide" gesture On the media playback screen, press the slide bar to change the playback position. You can change the playback position during playback.
Page 38
"Drag" gesture Press and hold the desired item and drag it to another position. The selected item moves to the new position. "Swipe" gesture Lightly swipe the screen in the desired direction. It is used to move fast vertically or horizontally across the menu screen or options list. "Spread/pinch"...
Using the Home screen The Home screen is the basic screen provided by the system and displays the current time and other basic information. Type1 Type2 A The displayed screen or menu items may differ, depending on the vehicle model and features.
Page 40
A The screen may differ depending on the vehicle model and specifications. Home screen (Type2) The Home screen layout is as follows: A To return to the Home screen from other screens, press (for EV6 only) 1-12...
Page 41
Displays the specified user profile image. To display the user profile settings screen, press the user image or name. Displays the date and time. Displays weather, and other information. Displays Radio/Media information. If you press the vehicle image, the Electric Vehicle screen appears. >...
Page 42
Editing the icons on the Home screen (Type1) You can see the icon list on the Home screen and change the locations for icons. At the upper left of the Home screen, press Menu > Edit Home Icons. To change the location of an icon, press and hold, and drag the icon to the desired position.
Accessing the All Menus screen You can see All Menus on the Home screen. Press and gently swipe the Home screen to the left as shown below. The All Menus screen appears. You can see the list of all functions of the system. A The screen may differ depending on the vehicle model and specifications.
Page 44
Editing the split screen You can change information on the split screen. Press and hold, and then drag the split screen up or down to select the desired information item. Closing the split screen Press the split screen button when the split screen is open. A To close split screens, press Split Screen on the menu at the top of the screen.
Useful functions Using the First Run Setup Using the phone projection function Viewing the driving assistance screen Using the climate control function Using the rear-seat climate control function Using the rear-seat conversation mode Using the rear-seat view Using the rear-seat quiet mode Using the sound mood lamp Playing Sounds of Nature Using the HD Radio Data...
Using the First Run Setup You can configure the system settings for each driver when multiple people are using the vehicle. In First Run Setup, you can configure the values to display on the screen such as user name, language, and map display method. When a safety warning message appears, read it, select the driver image, and then press Confirm.
Page 47
Set the keyboard type for text entry and then press Next. To set the driver's name, press Rename. The name change screen appears. A To proceed with First Run Setup without changing the driver's name, press Next. Set the map display method and then press Next. 2D North Up: Displays the map with the north fixed at the top.
When the First Run Setup screen appears, press OK. Displays the Home screen. A To set the detailed user information and operation environment, press Profile Settings. Using the phone projection function When you connect an Android smartphone or iPhone to the vehicle with a USB cable, you can run and control Apps on the phone through the widescreen using its user-friendly interface.
Page 49
Pairing to an Android smartphone via Android Auto When you connect an Android smartphone to the vehicle with Android Auto, you can run and control Apps on the phone through the widescreen using its user-friendly interface. To use Android Auto, first check the following. Visit the Android Auto website at https://www.android.com/auto to check the list of countries, device types, and models that support Android Auto.
Page 50
Using the Android Auto On the All Menus screen, press Android Auto. Perform the desired function. To run the functions for phone, music, or navigation on the smartphone, press the corresponding app icon. A When you are using your smartphone′s navigation via phone projection, sounds from both the system′s radio/media function and the navigation will be output through your vehicle′s speakers.
Page 51
Pairing to an iPhone via Apple CarPlay After you connect an iPhone to the vehicle with Apple CarPlay, you can run and control Apps on the phone through the system screen. To use Apple CarPlay, first check the following: For iPhone models that support Apple CarPlay, visit the Apple website at https://www. apple.com/ios/carplay.
Page 52
Using the Apple CarPlay On the All Menus screen, press Apple CarPlay. Perform the desired function. To run any of functions (phone, messaging, navigation, etc.) on your iPhone, press the corresponding function icon. A When you are using your smartphone′s navigation via phone projection, sounds from both the system′s radio/media function and the navigation will be output through your vehicle′s speakers.
Viewing the driving assistance screen You can see the view around the vehicle through the system screen. A The displayed screen may differ depending on the vehicle model. Ý Warning When backing up, make sure to follow the guidelines below: Before entering your vehicle, always check the area behind your vehicle.
Page 54
VIEW icon ( Home icon): Displays the Home screen. ( Rear view icon): Press the icon to display the desired view. ( Settings icon): Used to adjust the brightness and contrast of camera images. A To select the information to display on the screen, press Display Contents (if equipped).
Page 55
Viewing the rear view (if equipped) You can see the rear view through the system screen. On the rear view screen, press Press the icon to display the desired view. A The guidelines appear on the rear view. Displays the space required to open the trunk (tailgate). After a parking, check whether the space is sufficient to open the trunk (tailgate) and there is no obstacle.
Page 56
Surround View Monitor (if equipped) You can check the surroundings by using multiple cameras on the vehicle. A Use the +/- button on the right of the screen to zoom in or out. Viewing the surround view while driving In order to see the surround view, press the [ ] or [ ] button.
Page 57
Viewing the surround view while reversing Press the "R" (Reverse) button shifter (or move the shift lever to "R" in a previous vehicle model) with the vehicle turned on. The system displays the rear view of the vehicle. A The surround view monitor function is not available when you change the shift position to "P"...
Using the climate control function (if equipped) You can check and adjust the climate system settings on the screen. A For more information about how to use the heater and air conditioner, refer to Owner's Manual of the vehicle. A When you manipulate the climate control system while using the product, the climate settings appear on the upper part of the screen (if equipped).
Page 59
Returns to the previous step. Shows the outside temperature of the vehicle. Shows the set temperature for each seat. Adjust the temperatures for each seat. Shows the current airflow direction. Shows the current fan speed. Shows whether the automatic temperature control function is on or off. Shows whether the A/C is on or off.
Page 60
Using the Front Heat/Ventilation and Steering Wheel Heating Control (if equipped) You can adjust the seat warmer/ventilation settings to make your driving environment more pleasant. You can also turn on or off the steering wheel warmer function. On the All Menus screen, press Heat/Ventilation. Select to view the item.
Using the rear-seat climate control function (if equipped) You can check or set the rear-seat climate status on the system screen. Perform any of the following methods: Press the [REAR] button on the climate control system. On the All Menus screen, press Rear Climate. Select and then change the settings.
Page 62
The list of menu items appears. Display Off: Turns off the screen. To switch the screen back on, press the screen or briefly press the power button. Climate Settings: Configure specific climate control function settings (if equipped). User's Manual on Web (QR Code): Displays the QR code that provides access to the online user manual for the system.
The list of menu items appears. Display Off: Turns off the screen. To switch the screen back on, press the screen or briefly press the power button (if equipped). Front Climate: Displays the front-seat climate control settings screen (if equipped). Front Heat/Ventilation: Displays the front-seat warmer/ventilation settings screen (if equipped).
Using the rear-seat view (if equipped) You can check the status and safety of rear-seat occupants through the rear-seat camera feed displayed on the system screen. Ý Warning A car accident may occur when focusing on the vehicle display and not paying attention to the road while driving.
Using the rear-seat quiet mode (if equipped) To allow occupants in the rear seat to have rest and sleep, you can set to adjust the system volume. On the All Menus screen, press Quiet Mode. Press Quiet Mode. The audio volume in the rear seat is muted. When the volume for the front seats is set too high, the volume decreases automatically.
Using the sound mood lamp (if equipped) You can set to implement various lighting effects by synchronizing with the playing music. On the All Menus screen, press Sound Mood Lamp. Select and then change the settings. Returns to the previous step. Can turn on or off the sound mood lamp.
Playing Sounds of Nature Listen to the calming sound of rain, waves, and more to relax while driving by turning on a Sounds of Nature. On the All Menus screen, press Media > Sounds of Nature. Select from the Sounds of Nature list to play. Returns to the previous step.
Using the HD Radio Data You can access an array of information with HD radio data such as HD Radio™. A HD radio data are available only in metropolitan areas. On the All Menus screen, press HD Radio Data. Perform any of the following methods: Returns to the previous step.
Page 69
Viewing traffic information using HD radio data On the All Menus screen, press HD Radio Data. Press Traffic. Select an item from the traffic information list to see the details. A To see traffic information along with your current route or to see all available traffic information, press On Route.
Page 70
Viewing weather information using Doppler weather radar On the All Menus screen, press HD Radio Data. Press Doppler Radar. See the weather condition details in the HD Radio coverage area. Viewing fuel price information using HD radio data (if equipped) On the All Menus screen, press HD Radio Data.
Viewing the driving information (if equipped) You can analyze the driving patterns by checking the driving information such as driving time, distance, idle time, and vehicle speed distribution. Use this information to ensure safe and economical driving. A This function is available only when your vehicle is stationary with the vehicle started. On the All Menus screen, press Driving Info.
Viewing notifications (if equipped) You can view Kia Connect notifications including the navigation and map update information. A Subscribe to Kia Connect to check the function. > See "Subscribing to the service." On the All Menus screen, press Notifications. Select to view the item.
Driving distance/hours and maximum vehicle speed after valet mode activation A To use Valet mode, make sure you install the Kia Connect App on your smartphone and sign up for the Kia Connect Service. Use either Google Play Store or App Store (depending on your smartphone model) to download and install the Kia Connect App and sign up for the Kia Connect Service.
You can use various EV-specific functions. Type1 (EV only) Type2 (EV6 only) A The displayed screen or menu items may differ, depending on the vehicle model and features. Check the screen type for your vehicle model and view the appropriate instructions.
Page 75
Electric Vehicle screen (EV only) The Electric Vehicle screen provides the following features and information: Returns to the previous step. Can check the drivable range under the remaining battery amount and search for nearby charging stations. > See "Viewing the drivable range (EV only)" Can check information such as drivable distance and battery status.
Page 76
(2D Heading Up): Rotates the map depending on the travel direction. (2D North Up): Displays the map with the north fixed at the top. Zooms in the map. Zooms out the map. Can see the status icons for charging stations. A Subscribe to Kia Connect to check the function. 2-32...
Page 77
The list of menu items appears. Display Off: Turns off the screen. To switch the screen back on, press the screen or briefly press the power button. User's Manual on Web (QR Code): Displays the QR code that provides access to the online user manual for the system.
Page 78
Viewing the energy information (EV only) You can see the drivable distance and the estimated charging time. On the Electric Vehicle screen, press Energy Information. Energy information screen Returns to the previous step. You can see the drivable distance and battery status. Press to move to the energy consumption information screen.
Page 79
User's Manual on Web (QR Code): Displays the QR code that provides access to the online user manual for the system. Split Screen: Can turn on or off the split screen mode. A The drivable distance is an estimate based on the real-time fuel economy. When your driving pattern changes, the drivable distance may differ.
Page 80
Scheduling a charge and climate controls You can schedule the charging and climate controls based on the departure time. [ Setting the departure time On the Charge Management screen, press Charging and Climate. Press on the right of Next Departure. Select the departure time and then press for the item.
Page 81
Select and then change the settings. You can set the off-peak electricity time. You can charge the battery for the Next Departure, primarily using the off-peak electricity time. You can charge the battery only at the off-peak electricity time. Press OK. A Scheduled charging is performed only when the charging connector is connected to the vehicle.
Page 82
Setting for location-based charging You can set to use the scheduled charging and climate controls only in specific locations and select the current type to use while charging. On the Charge Management screen, press Charging Location. Check Use Location-based Charging and then set the following details: Can set the location to use the scheduled charging and climate controls.
Page 83
Setting for charging current Select the charging current to be used for AC Charging. On the Charge Management screen, press Charging Current. Select a charging type to set the charging current. Set the charging current and then press OK. A The charging time may vary depending on charging conditions. A If a problem occurs while charging, lower the charging current and try again.
Page 84
Select the desired item to see its information. > User's A To access the online user's manual on the ECO Driving screen, press Manual on Web (QR Code) and then scan the displayed QR code. Seeing the environmental contribution information You can check the amount of carbon dioxide reduction compared to driving with gasoline.
Page 85
Configuring the EV settings (EV only) You can set to display the warning message when the remaining battery amount is low for the destination and you can also see the drivable distance. In winter, you can also set to increase the battery temperature in advance. On the Electric Vehicle screen, press EV Settings.
Using the Electric Vehicle menu (Type2) (for EV6 only) You can use various EV-specific functions, such as driving and energy information views and vehicle charge scheduling. On the All Menus screen, press EV. Electric Vehicle screen The Electric Vehicle screen provides the following features and information: Returns to the previous step.
Page 87
The list of menu items appears. Display Off: Turns off the screen. To switch the screen back on, press the screen or briefly press the power button. Energy Information: You can view the drivable range, expected time required to complete charging, fuel efficiency graph and power consumption.
Page 88
Displays the Home screen. Used to change the map display mode. (2D Heading Up): Rotates the map depending on the travel direction. (2D North Up): Displays the map with the north fixed at the top. (3D Map): Rotates the map depending on the travel direction for 3D view. You can adjust the volume of navigation or GPS warning sound.
Page 89
Viewing the energy information/the electricity use/the ECO driving information You can view the drivable range, expected time required to complete charging, fuel efficiency graph and power consumption. Viewing the energy information screen You can see the drivable distance and the estimated charging time. Press the vehicle image on the Electric Vehicle screen.
Page 90
The list of menu items appears. Display Off: Turns off the screen. To switch the screen back on, press the screen or briefly press the power button. User's Manual on Web (QR Code): Displays the QR code that provides access to the online user manual for the system.
Page 91
Setting the next departure time Set the next departure time. On the Electric Vehicle screen, press Next Departure. Select the departure time and then press for the item. A To access the online user's manual of the system from the Next Departure screen, press >...
Page 92
Scheduling a charge and climate controls You can configure various functions such as automatic battery charging or climate control according to the specified departure time. On the Electric Vehicle screen, press Scheduled Charging and Climate. Select and then change the settings. A To access the online user's manual of the system from the Scheduled Charging and Climate screen, press >...
Page 93
Scheduling a charging You can schedule the charging based on the departure time. On the Electric Vehicle screen, press Scheduled Charging and Climate. Check Scheduled Charging and then press Select and then change the settings. You can set the off-peak electricity time. You can charge the battery for the next departure, primarily using off-peak hours to benefit from lower rates.
Page 94
Scheduling climate controls Configure settings to perform climate control at the next departure time. On the Electric Vehicle screen, press Scheduled Charging and Climate. Check Scheduled Climate and then press Set the desired temperature and auto defogging and then press OK. Setting an electricity usage limit Set an electricity usage limit.
Page 95
Use the control bar to adjust the minimum battery level. A When an electricity usage limit is set, you cannot go below the minimum battery level when using power. Configuring the EV settings You can set a target battery level. You can also set an appropriate current depending on the charger type.
Page 96
You can set the charging current depending on the installed charger type. A The charging time may vary depending on charging conditions. A If a problem occurs during charging, lower the charging current and try again. If you lower the charging current, it may take longer to charge the battery. Can increase the battery temperature in advance to enhance the charging and driving performance when scheduling charge or climate controls in winter.
Page 97
Radio Turning on the radio Listening to HD Radio™ Listening to SiriusXM™ radio...
Turning on the radio You can scan radio channels by using various options. Save your favorite channels to the presets list. Perform any of the following methods: On the All Menus screen, press Radio. On the control panel, press the [RADIO] button. A When multiple media are connected, press the [RADIO] or [MEDIA] button once more and then press the desired media source from the Radio/Media selection window (if equipped).
Page 99
Radio screen (Type1) The radio screen provides various functions while listening to radio broadcasts. Returns to the previous step. Can change the radio mode. Activate the HD Radio mode. You can change radio channels by using voice commands. > See "Changing the channel by using voice commands."...
Page 100
Ý Warning Driving while distracted can result in a loss of vehicle control that may lead to an accident, severe bodily injury, or death. The driver's primary responsibility is the safe and legal operation of the vehicle, and the use of any vehicle systems, including the touch screen and steering wheel controls, which take the driver's eyes, attention, and focus away from the safe operation of the vehicle, or which are not permissible by law, should never be used during the operation of the vehicle.
Page 101
The list of menu items appears. Display Off: Turns off the screen. To switch the screen back on, press the screen or briefly press the power button. Enter Station: Can select or directly enter the desired radio frequency. Station List: Can see the list of available radio stations.
Page 102
Changing the radio mode (Type1) Perform any of the following methods: On the Radio screen, press Band. On the control panel, press the [RADIO] button repeatedly. Changing the radio mode (Type2) Perform any of the following methods: On the Radio screen, press Radio Mode button repeatedly. On the control panel, press the [RADIO] button repeatedly.
Page 103
Changing the radio channel (Type1) Perform any of the following methods: On the Radio screen, press the desired channel from the presets list. A You can also change the channel by using the Move lever/button on the steering wheel. On the control panel, press the [ SEEK] or [TRACK ] button.
Page 104
Changing the radio channel (Type2) Perform any of the following methods: On the Radio screen, press the desired channel from the presets list. A You can also change the channel by using the Move lever/button on the steering wheel. On the control panel, press the [ SEEK] or [TRACK ] button.
Page 105
Saving radio channels (Type1) You can save a specific radio station's channel and easily access the channel. While listening to a broadcast, press in the middle of the screen. The current channel is added to the presets list. A Alternatively, on the Radio screen, press Menu > Station List and press of the channel you want to save.
Page 106
Editing the radio channel list (Type1) Deleting a registered channel At the upper left of the Radio screen, press Menu > Delete Presets. Select the channel to delete and press Delete > Yes. The channel is deleted and the preset number is emptied. A When the current channel is already assigned to the presets list, press the icon to remove the channel from the list.
Listening to HD Radio™ You can listen to radio from HD radio stations when they are available. Perform any of the following methods: Type1: On the Radio screen, press Type2: On the Radio screen, press When HD Radio signals are received, the radio switches from the analog mode to the HD mode.
Page 108
HD Radio™ Technology Program Info: Presents song name, artist, station IDs, and other relevant data streams. Digital, CD-quality sound. HD Radio™ Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today's FM and FM sounds like a CD.
Listening to SiriusXM™ radio You can listen to radio channels provided by SiriusXM, a satellite radio service. Changing to SiriusXM mode (Type1) On the Radio screen, press Band > SiriusXM. SiriusXM mode screen Returns to the previous step. Can change the radio mode. Can enter channel number to select the channel directly.
Page 110
Can turn on or off the split screen mode. Displays the options list. Channel List: Can see the list of available SiriusXM channels. What is on My Presets?: Displays the broadcast schedule. Featured Favorites: Can listen to groups of channels provided by SiriusXM. Delete Presets: Can delete a registered channel from the presets list.
Page 111
Moves to the previous segment. Press and hold to rewind the broadcast. Pauses or restarts the broadcast. Moves to the next segment. Press and hold to fast-forward the broadcast. Can change the radio mode. You can go to the previous or next channel. Can enter channel number to select the channel directly.
Page 112
Searching for SiriusXM radio channels (Type1) You can select a channel from available SiriusXM channels. On the Radio screen, press Band > SiriusXM. On the SiriusXM radio screen, press Menu > Channel List. Select a category and a channel. A To skip a channel when scanning with the [ SEEK] and [TRACK ] buttons or Search knob, press Skip.
Page 113
Selecting a channel by entering a channel number (Type1) When you know the exact channel number, you can enter it to select the channel directly. On the Radio screen, press Band > SiriusXM. On the SiriusXM radio screen, press Enter Channel. Enter a channel number and press OK.
Page 114
Viewing the program schedule (Type1) You can see the program schedule and information for the channels saved in your preset list. On the Radio screen, press Band > SiriusXM. On the SiriusXM radio screen, press Menu > What is on My Presets?. Set the date and time on the top line of the screen.
Page 115
Select a channel and a program to see its detailed information. A If any hidden information, an arrow appears next to the program. Press the arrow to see the hidden information. Listening to Featured Favorite channels (Type1) You can listen to Featured Favorites channels on the SiriusXM radio. Multiple sets of channels can be broadcast and can be changed by SiriusXM.
Using media You can use the USB mode to play music files on a connected mobile device, such as USB device and MP3 player. You can also play Bluetooth music by connecting a Bluetooth device, which supports a Bluetooth function. Playing music from a USB device Connect a media device to play to the USB port on the vehicle.
Page 119
Returns to the previous step. Moves to the file list screen. Displays the sequence number of the current file and the total number of files for playback. Displays the information of the current music. Press the artist or album info of the current song to go to list of songs by the artist or from the album.
Page 120
Pause/Resume You can pause or resume playback of a USB music file. On the USB music playback screen, press Rewind By using the rewind function, you can listen to music in the USB device from the desired point during playback. Perform any of the following methods: On the USB music playback screen, press and hold On the control panel, press and hold the [ SEEK] button (if equipped).
Page 121
Playing the previous file You can play the previous file during playback in the USB device. Perform any of the following methods: On the USB music playback screen, press within 3 seconds during playback. On the control panel, press the [ SEEK] button within 3 seconds during playback (if equipped).
Page 122
Turning on/off the shuffle playback mode for USB music You can turn on or off the shuffle playback mode for USB music. On the USB music playback screen, press repeatedly. Each time the icon is pressed, the shuffle playback mode is turned on and off. When the shuffle playback is active, the files are played randomly with no sequence.
Page 123
Ü Ü Caution Be sure to start the vehicle before connecting a USB device. When you start the vehicle after connecting a USB device, the USB device may get damaged. Be careful of static electricity when connecting or removing a USB device. It may cause a system failure.
Page 124
Playing music via Bluetooth To use a Bluetooth device for audio playback, connect a device that supports Bluetooth communication such as mobile phone and MP3 player. For more information about Bluetooth connection: > see "Connecting a Bluetooth device." A The controls or display screens may differ depending on the connected Bluetooth device, phone model, and music player App.
Page 125
Can see the duration of the playing song and the current playback position. Find and connect other Bluetooth devices. Moves to the music list screen. A The list of Bluetooth audio files may not appear depending on the connected device or app.
Page 126
Resuming playback of the previous Bluetooth audio file You can play the previous Bluetooth audio file during playback. Perform any of the following methods: On the Bluetooth audio playback screen, press twice. On the control panel, press the [ SEEK] button twice (if equipped). A The actions required may differ depending on the connected device.
Navigation Navigation functions Various ways to find routes Using saved favorite places Searching for gas stations Searching for EV (Electric Vehicle) charging stations END USER LICENSE AGREEMENT...
Select one of the locations stored in your address book. > See "Using saved favorite places." Search for Kia Dealerships easily. > See "Searching for Kia Dealerships." Cancel guidance to the destination. > See "Canceling the route guidance." View information on the entire route to the destination.
Page 129
Register your home, office or other frequently visited places as a favorite location to making searching easier. > See "Saving a frequently visited place as a favorite place." The list of menu items appears. Reorder Icons: Can change the location of an icon on the Navigation Menu screen. Display Off: Turns off the screen.
Page 130
Select a destination from the search result. A When the communication function is turned on, online search is performed first. A You can see the sites in the list on the preview screen at the right. A To sort the search results in a different order, press on the attribute to toggle between options.
Page 131
When you are driving at high speeds, route recalculations may take longer. A Because the navigation system is used for information purposes only, Kia does not assume responsibility of the accuracy of the information. A When the traffic information is not received, the status icon ( ) appears at the top of the map screen.
Page 132
Map screen The map screen provides various functions and informations, as follows: Option A Option B (EV only) Displays the Home screen. Used to change the map display mode. (2D Heading Up): Rotates the map depending on the travel direction. (2D North Up): Displays the map with the north fixed at the top.
Page 133
Displays the system information on the map. (It can display up to two items.) Traffic information (with an icon if there is no HD data reception) Bluetooth connection status Displays the point to change the driving direction. Displays the next point to change the driving direction. Displays the lanes in different colors.
Page 134
Using the detailed guidance When the vehicle needs to change the driving direction or lanes, a zoomed-in map automatically appears. A To display or hide the detailed guidance, press When the detailed guidance appears while driving, select and perform the desired function.
Page 135
Adjusting the navigation volume You can adjust the volume of navigation or GPS warning sound. On the map screen, press and then press , or use the control bar to adjust the volume. A To have the navigation sound always output first over media sound, check Navigation Volume Priority.
Page 136
Viewing traffic Information You can see real-time traffic information such as ongoing road works or accidents. On the map screen, press > Traffic. Select an item from the real-time traffic information list and see the details. A To reroute using recent traffic information while in guidance, press Detour. A To see traffic information along the current route or to see all available traffic information, press On Route.
Various ways to find routes On the Navigation menu, you can set the destination by using various searches, such as entering the location information or selecting from recent destinations or categorized places. Perform any of the following methods: On the All Menus screen, press Navigation Menu. On the control panel, press the [NAV] button.
Page 138
Enter the location data such as place name, address, or coordinates and then press OK. A When there are any similar matches, the recommendations appear at the left of keypad. A To access the online user's manual on the Places screen, press >...
Page 139
Searching from previous destinations You can set a destination by selecting from the recently searched ones. On the Navigation Menu screen, press Previous Destinations. The navigated destinations appear in the list. A Available icons and their arrangement may differ depending on the vehicle model and specifications.
Page 140
> A To access the online user's manual, on the Kia Dealerships screen, press User's Manual on Web (QR Code) and then scan the displayed QR code. Check the location of the destination and then press Set as Destination.
Page 141
Searching for nearby points of interest(POI) You can set a destination after searching the nearby points of interest by the category. On the Navigation Menu screen, press POI Categories. A Available icons and their arrangement may differ depending on the vehicle model and specifications.
Page 142
Select a destination from the search result. A To display the result of search around a specific location, select a sort criteria from the list on the left of the screen. A To sort the search results in a different order, press on the attribute to toggle between options.
Page 143
Select a route and press Start Guidance. > Nearby POIs > POI A To change the type of nearby POIs on the map, press Display. > Nearby POIs > POI A To see nearby POIs during guidance on the map, press Categories.
Page 144
On the map for a search, press Add Waypoint. The selected waypoint is added to the route. After adding waypoints, press Calculate. > User's A To access the online user's manual on the Edit Route screen, press Manual on Web (QR Code) and then scan the displayed QR code. Select the updated route and then press Start Guidance.
Page 145
After editing the route, press Calculate. Select the updated route and then press Start Guidance. Deleting a waypoint You can delete a waypoint from the route. On the Navigation Menu screen, press Edit Route. Select a waypoint to delete from the route and then press To search the route again after removing the waypoint, press Calculate.
Page 146
Select the search option and press Recalculate. > User's A To access the online user's manual on the Route Options screen, press Manual on Web (QR Code) and then scan the displayed QR code. A Available options may differ depending on the vehicle model and specifications. Avoiding specific zones You can resume routing after excluding the specified roads such as congested roads or roads under construction.
Page 147
Select the updated route and then press Start Guidance. A When there is any zone under construction ahead on the way, you are prompted to confirm whether or not to exclude the zone from the route. To avoid the zone, press Yes to resume routing.
Page 148
Searching for emergency services On the Navigation Menu screen, press POI Categories. A Available icons and their arrangement may differ depending on the vehicle model and specifications. Select the type of emergency service. Select a destination from the search result. A To sort the search results in a different order, press on the attribute to toggle between options.
Using saved favorite places After registering the current location or frequently visited places, you can easily set any of them as a destination. Saving a searched place as a favorite place You can search and register the desired place. On the Navigation Menu screen, press Saved Places. A Available icons and their arrangement may differ depending on the vehicle model and specifications.
Page 150
Press Places and enter a keyword for a search. A You can also search for the place by using other methods. > See "Various ways to find routes." Check the location and information of the current position and then press Done. The place is registered as a favorite place.
Page 151
Saving a frequently visited place as a favorite place You can register your home, office, or other frequently visited place as a favorite. At the bottom of the Navigation Menu screen, select a button that has A Available icons and their arrangement may differ depending on the vehicle model and specifications.
Page 152
Setting a saved favorite place as the destination You can set any in the saved places of the navigation system as a destination. On the Navigation Menu screen, press Saved Places. Select the desired option from the left of the screen. Select the place to set as a destination.
Page 153
Editing information about a saved favorite place You can change information or properties of a registered location. On the Navigation Menu screen, press Saved Places. Select an option that contains the destination you want from the left of the screen. Press Edit next to the place for changing information.
Searching for gas stations You can search nearby gas stations. On the Navigation Menu screen, press POI Categories > Gas Stations. A Available icons and their arrangement may differ depending on the vehicle model and specifications. Select a destination from the search result. A To display the result of search around a specific location, select a sort criteria from the list on the left of the screen.
Searching for EV (Electric Vehicle) charging stations (EV only) You can search nearby charging stations. On the Navigation Menu screen, press POI Categories > EV Charging Stations. A Available icons and their arrangement may differ depending on the vehicle model and specifications.
END USER LICENSE AGREEMENT PLEASE READ THIS END USER LICENSE AGREEMENT ("EULA") CAREFULLY BEFORE USING THE NAVIGATION SYSTEM. This is a license agreement between you and Hyundai Autoever, CORP. including its affiliates ("COMPANY") regarding a copy of the COMPANY navigable map database together with associated software, media and explanatory printed documentation published by COMPANY (jointly the "Product").
Page 157
COPYING OR USE OF THE PRODUCT EXCEPT AS PERMITTED BY THIS EULA IS UNAUTHORIZED AND IS COPYRIGHT INFRINGEMENT UNDER THE LAWS OF YOUR COUNTRY. IF YOU COPY OR USE THE PRODUCT WITHOUT COMPANY'S PERMISSION, EXCEPT AS PERMITTED BY THIS EULA, YOU ARE VIOLATING THE LAW AND LIABLE TO COMPANY AND ITS LICENSORS FOR DAMAGES, AND YOU MAY BE SUBJECT TO CRIMINAL PENALTIES.
Page 158
WARNING. THE PRODUCT REFLECTS REALITY AS EXISTING BEFORE YOU RECEIVED THE PRODUCT AND IT COMPRISES DATA AND INFORMATION FROM GOVERNMENT OTHER SOURCES. ACCORDINGLY, THE PRODUCT MAY CONTAIN INACCURATE OR INCOMPLETE INFORMATION DUE TO THE PASSAGE OF TIME, CHANGING CIRCUMSTANCES, SOURCES USED AND THE NATURE OF COLLECTING COMPREHENSIVE GEOGRAPHIC PRODUCT, ANY OF WHICH MAY LEAD TO INCORRECT RESULTS.
Page 159
Third-Party Copyright Notices. The third-party sourced data has been incorporated into or made a part of the Product and is being sublicensed to you subject to the terms and conditions of this EULA. In this regard, you shall not remove or tamper with any intellectual property rights notice attached or used in relation to data supplied by the Licensors.
Page 160
U.S. Government End Users. If the Product is being acquired by or on behalf of the United States Government or any other entity seeking or applying rights similar to those customarily claimed by the United States Government, this Product and related documentation are "Commercial Items"...
Page 163
Phone Connecting a Bluetooth device Making a call via Bluetooth Accepting an incoming call over Bluetooth Checking new messages over Bluetooth...
A For more information on Bluetooth-enabled devices and their functional compatibility, visit the KIA America website (https://www.kia.com). Registering a device To connect a Bluetooth device to the system, first add the device to the list of Bluetooth devices on the system.
Page 165
Turn on Bluetooth on the Bluetooth device to connect and select the vehicle system on the list of searched devices. A The system's Bluetooth name can be seen on the Add New Device window. Check that the authentication code on the Bluetooth device screen matches the one on the system screen and approve the connection on the device.
Page 166
Connecting a registered device To use a Bluetooth device, first connect a registered Bluetooth device to the system. A You can add one Bluetooth hands-free kit or up to two Bluetooth audio devices. On the All Menus screen, press Setup > Device Connections > Device Connections.
Page 167
Returns to the previous step. Search for a setting item by voice or by entering a keyword. Select hands-free or Bluetooth audio to connect or disconnect Bluetooth devices. Add a new device to the system. Delete a registered device from the system. The list of menu items appears.
Making a call via Bluetooth You can connect a Bluetooth device with the hands-free function to use a Bluetooth phone. The Bluetooth connection allows you to view call details directly from the system screen, and to make calls safely and easily use your vehicle microphone and speaker. Ý...
Page 169
A The download may not work in some phone models. A You can download up to 50 call records for each list. A Call durations do not appear on the system screen. A You cannot download call records when the download is prohibited by the phone. Some phone models may require approval for a download.
Page 170
Device Connections Settings: Can change the Bluetooth settings. User's Manual on Web (QR Code): Displays the QR code that provides access to the online user manual for the system. Split Screen: Can turn on or off the split screen mode. A The displayed name may differ depending on the vehicle model and specifications.
Page 171
To set a phone number as a favorite, press the button next to it. The phone number is now added to your favorites list. Choose a contact from the list. The system dials the selected contact. A You can add up to 10 favorite contacts for each device. A When another mobile phone is connected, the screen does not display the contacts from the previous phone, but they are kept in the system until the phone is deleted from the list.
Page 172
The list of menu items appears. Display Off: Turns off the screen. To switch the screen back on, press the screen or briefly press the power button. Add New/Edit: Add a new contact or edit the favorites list from downloaded contacts. Delete: Delete a contact from the favorites list.
Page 173
A You can download only the contacts that can be displayed on the connected Bluetooth device. The contacts may not appear in some Apps. A You can download up to 5,000 contacts for each device. A The download may not work in some phone models. A Contacts from both the mobile device and its SIM card are downloaded at the same time.
Page 174
Use the index to quickly find the contact you are looking for. Make a phone call using voice recognition. > See "Dialing with voice recognition." Find and connect other Bluetooth devices. The list of menu items appears. Display Off: Turns off the screen. To switch the screen back on, press the screen or briefly press the power button.
Page 175
After entering a phone number, press A call is connected to the entered phone number. A When contacts are on the system, search for the desired contact by entering the initial letters or number on the dial pad (e.g. John Doe > JD). A Learn more about receiving calls while using Bluetooth connection.
Page 176
The list of menu items appears. Display Off: Turns off the screen. To switch the screen back on, press the screen or briefly press the power button. Privacy Mode: Activate privacy mode to protect personal data. The data downloaded from the mobile phone stays hidden while this mode is on.
Accepting an incoming call over Bluetooth The system screen alerts you when you receive a call while connected using Bluetooth. Perform any of the following methods: Press Accept on the screen. On the steering wheel, press the Call button. Ý...
Page 178
Using functions during a call During a call, the following screen appears. Press to use the available options. Returns to the previous step. Used to turn on or off the microphone mute function. Can adjust the microphone volume. Displays or hides the dial pad screen. Used to switch the call to the mobile phone.
Switching to another call You can receive another incoming call while in a call. This option is available only when the connected mobile phone supports the call hold function. The original call is put on hold. To switch between two calls, use either option. Press Switch.
Page 180
Can see the message details. Reads out the message through the speakers in the vehicle. Used to close the notification window. A The message notification window does not appear when the privacy mode is enabled or the message notification is turned off. A The screen display may differ depending on the mobile phone model.
Page 181
Checking new messages from the list Perform any of the following methods: On the All Menus screen, press Phone. On the steering wheel, press the Call button. On the Bluetooth Call screen, press Select a message from the list. Check the message.
Page 182
A To call using voice recognition, there must be contacts stored on the system. A It is available only when the Kia Connect service is active. Perform any of the following methods: On the All Menus screen, press Phone.
Voice recognition With the voice recognition function, you can access various functions of the infotainment system without manipulating the screen or buttons. This function prevents driver distraction and dangerous situations. Use voice commands to access various functions easily. Type1 Type2 A Depending on vehicle model or specifications, the screen layout and available commands may differ.
Page 185
A Voice recognition may not work properly when: The sunroof or windows are open so the wind is strong. The fan speed of the air conditioner or heater is high. The vehicle is passing through a tunnel. The vehicle is driving on an unpaved road and its noise and vibration are loud. Noise is loud due to a heavy rain or storm.
Page 186
To end the voice recognition, perform one of the following methods: In standby mode for voice recognition, say "Exit". On the voice recognition screen, press Exit. On the steering wheel, press and hold the Voice Recognition button. A When the Voice Recognition button is pressed in standby mode for voice recognition, the standby time is extended.
Page 187
Adjusting the voice guidance volume Adjust the voice guidance volume when the system volume is so low or high and it interferes with your driving. When the voice recognition is active, use the Volume knob on the control panel. Viewing the voice recognition help You can see more details on how to perform various functions by voice commands.
Page 188
To see more details on how to use voice commands for each function, press next to the function name. After seeing the help, perform any of the following methods. On the help screen, press Exit. In standby mode for voice recognition, say "Exit". A The screen may differ depending on the vehicle and specifications.
Page 189
Using the voice recognition function (Type2) Press the Voice Recognition button on the steering wheel. After a beep sound, say your voice command. A If you press the Voice Recognition button when the system is waiting for a voice command, the standby time is extended. A If you press the Voice Recognition button in the middle of voice guidance on the voice recognition function, the voice guidance is skipped.
Page 190
Using voice recognition via phone projection Use the voice recognition function on your smartphone via phone projection. > See "Using the phone projection function." Adjusting the voice guidance volume When voice recognition mode is on, you can adjust the volume by using either the volume button on the steering wheel or the volume knob.
Page 191
Available voice commands (Type1) You can view the voice commands that can be recognized by the system. A Depending on vehicle model or specifications, the screen layout and available commands may differ. Check the screen type for your vehicle model and view the appropriate instructions.
Page 192
Function Find <POI or Address> You can search for a designated POI name or address. For example, say "Find Kia dealerships" or "Find Kia dealerships in Seattle." Find Address in <State> You can search for a location with its address in a designated state.
Page 193
A When you use a command starting with "Find," the system searches for locations within the state or province where your vehicle is currently located. To search for locations in another state or province, say the state or province name first and then say the location you want.
Page 194
Command Function Open/Close the rear Open or close all rear-seat windows. windows Open/Close the sunroof Open or close the sunroof. Open/Close the Open or close the trunk (liftgate). trunk (liftgate) Turn On/Off the heated Turn on or off the steering wheel heater. steering wheel Turn On/Off all seat Turn on or off the heaters for all seats.
Page 195
A Vehicle control commands are recognizable in English only. A Some commands may not be supported, depending on the vehicle model and functions. Rear-seat function commands (if equipped) Command Function Passenger Talk Turn on the Passenger Talk. Quiet Mode Turn on or off the Quiet Mode. Turn off Quiet Mode A Some commands may not be supported, depending on the vehicle model and functions.
Page 196
POI names POI name Wendy's Restaurants White Castle POI name Blimpie Fast Food Checkers Arby's Culver's Boston Market Five Guys Burgers and Fries BURGER KING Jersey Mike's Subs Carl's Jr Steak n Shake Chick-fil-A Whataburger Chipotle Coffee Shops Church's Chicken Starbucks Dairy Queen Dunkin' Donuts...
Page 197
POI name POI name Ponderosa Latin American Publix Mexican Seasons 52 Cantina Laredo Sheetz Chevys Silver Fox El Chico Texas Roadhouse Del Taco TGI Friday's Moe's Southwest Grill The Capital Grille Qdoba A&W Toks Bob Evans Asian Buffalo Wild Wings Chinese Cracker Barrel Old Country Store PF Chang's China Bistro...
Page 198
Automotive POI name Sheetz POI name Shell KIA Dealerships Sinclair Gas Stations Speedway Sunoco ampm TEXACO ARCO TravelCenters of America Ultramar Gas+ Valero Casey's General Store Wawa Cenex Hess Express Chevron Irving CITGO Pemex Conoco 7-Eleven Esso Costco Exxon Parking...
Page 199
Grand Residences by Marriott EV Charging Stations Hampton Inn ChargePoint Hawthorn Suites EVgo Hilton Blink Hilton Garden Inn SemaConnect Hilton Grand Vacations Greenlots Holiday Inn Electrify America Holiday Inn Express Hotel & Suites Homewood Suites Kia Auto Service Hotel Indigo 7-17...
Page 200
POI name POI name Howard Johnson Travelodge Hyatt Place Travelodge Canada Hyatt WALDORF ASTORIA COLLECTION Hyatt Summerfield Suites Wingate by Wyndham Intercontinental Wyndham JW Marriott Extended Stay America La Quinta Inn & Suites Fairfield Inn by Marriott Lexington SpringHill Suites by Marriott Mainstay Suites Towneplace Suites Marriott...
Page 201
POI name POI name Rest Areas Convenience Stores Complete Rest Area 7-Eleven Parking and Rest Room Only ampm Parking Only Motorway Service Area Circle K Scenic Overlook Fleetfuels City Centers GetGo Campgrounds Kangaroo Express Ferry Terminals Murphy Express Bus Stations Murphy USA Local Transit Petro Stopping Centers...
Page 202
POI name POI name Save-A-Lot Boost Mobile SuperValu Cricket Wireless Albertsons metroPCS ALDI Home Specialty Stores Piggly Wiggly ABC Fine Wine & Spirits Safeway Ace Hardware Winn-Dixie Claire's Pharmacies Costco CVS/pharmacy Home Depot Giant Drugstore Lowe's Giant Eagle Merle Norman Ingles Pharmacy PETCO Kmart Pharmacy...
Page 203
POI name POI name Sporting Goods Shoe Stores Dick's Sporting Goods Payless Shoesource Sports Authority General Merchandise HIBBETT SPORTS Recreation Music Stores Bookstores POI name Barnes & Noble Booksellers Amusement Parks Gifts Museums Clothing Cinemas Mark's Golf Courses Aeropostale Sports Complexes American Eagle Outfitters Sports Activities Cato...
Page 204
Financial Services POI name ATMs POI name Bank of America Banks BB&T Bank of America Chase BB&T Citibank Chase Citizens Bank Citibank Fifth Third Bank Citizens Bank KeyBank Fifth Third Bank PNC Bank KeyBank RBC Royal Bank PNC Bank Regions RBC Royal Bank SunTrust Regions...
Page 205
Community Services POI name POI name Police Stations Hospitals Post Offices Medical Services Libraries Physicians Schools Tax Services Fire Departments Attorneys Convention Centers Funeral Homes Churches Hair & Beauty Synagogues Cleaning & Laundry City Halls Social Services Civic Centers Communication Court Houses Dentists Government Offices...
Page 206
Say a contact's name and then enter the message content by following the guidance. This command is available only if Kia Connect is activated. Send Message to You can send a text message to that specific contact. Enter the <Name>...
Page 207
Function Find <POI or Address> You can search for a designated POI name or address. For example, say "Find Kia dealerships" or "Find Kia dealerships in Seattle." Find Address in <State> You can search for a location with its address in a designated state.
Page 208
A When you use a command starting with "Find," the system searches for locations within the state or province where your vehicle is currently located. To search for locations in another state or province, say the state or province name first and then say the location you want.
Page 209
Command Function Open/Close the rear Open or close all rear-seat windows. windows Open/Close the sunroof Open or close the sunroof. Open/Close the Open or close the trunk (liftgate). trunk (liftgate) Turn On/Off the heated Turn on or off the steering wheel heater. steering wheel Turn On/Off all seat Turn on or off the heaters for all seats.
Page 210
A Vehicle control commands are recognizable in English only. A Some commands may not be supported, depending on the vehicle model and functions. Rear-seat function commands (if equipped) Command Function Passenger Talk Turn on the Passenger Talk. Quiet Mode Turn on or off the Quiet Mode. Turn off Quiet Mode A Some commands may not be supported, depending on the vehicle model and functions.
Page 211
POI names POI name Wendy's Restaurants White Castle POI name Blimpie Fast Food Checkers Arby's Culver's Boston Market Five Guys Burgers and Fries BURGER KING Jersey Mike's Subs Carl's Jr Steak n Shake Chick-fil-A Whataburger Chipotle Coffee Shops Church's Chicken Starbucks Dairy Queen Dunkin' Donuts...
Page 212
POI name POI name Ponderosa Latin American Publix Mexican Seasons 52 Cantina Laredo Sheetz Chevys Silver Fox El Chico Texas Roadhouse Del Taco TGI Friday's Moe's Southwest Grill The Capital Grille Qdoba A&W Toks Bob Evans Asian Buffalo Wild Wings Chinese Cracker Barrel Old Country Store PF Chang's China Bistro...
Page 213
Automotive POI name Sheetz POI name Shell KIA Dealerships Sinclair Gas Stations Speedway Sunoco ampm TEXACO ARCO TravelCenters of America Ultramar Gas+ Valero Casey's General Store Wawa Cenex Hess Express Chevron Irving CITGO Pemex Conoco 7-Eleven Esso Costco Exxon Parking...
Page 214
Grand Residences by Marriott EV Charging Stations Hampton Inn ChargePoint Hawthorn Suites EVgo Hilton Blink Hilton Garden Inn SemaConnect Hilton Grand Vacations Greenlots Holiday Inn Electrify America Holiday Inn Express Hotel & Suites Homewood Suites Kia Auto Service Hotel Indigo 7-32...
Page 215
POI name POI name Howard Johnson Travelodge Hyatt Place Travelodge Canada Hyatt WALDORF ASTORIA COLLECTION Hyatt Summerfield Suites Wingate by Wyndham Intercontinental Wyndham JW Marriott Extended Stay America La Quinta Inn & Suites Fairfield Inn by Marriott Lexington SpringHill Suites by Marriott Mainstay Suites Towneplace Suites Marriott...
Page 216
POI name POI name Rest Areas Convenience Stores Complete Rest Area 7-Eleven Parking and Rest Room Only ampm Parking Only Motorway Service Area Circle K Scenic Overlook Fleetfuels City Centers GetGo Campgrounds Kangaroo Express Ferry Terminals Murphy Express Bus Stations Murphy USA Local Transit Petro Stopping Centers...
Page 217
POI name POI name Save-A-Lot Boost Mobile SuperValu Cricket Wireless Albertsons metroPCS ALDI Home Specialty Stores Piggly Wiggly ABC Fine Wine & Spirits Safeway Ace Hardware Winn-Dixie Claire's Pharmacies Costco CVS/pharmacy Home Depot Giant Drugstore Lowe's Giant Eagle Merle Norman Ingles Pharmacy PETCO Kmart Pharmacy...
Page 218
POI name POI name Sporting Goods Shoe Stores Dick's Sporting Goods Payless Shoesource Sports Authority General Merchandise HIBBETT SPORTS Recreation Music Stores Bookstores POI name Barnes & Noble Booksellers Amusement Parks Gifts Museums Clothing Cinemas Mark's Golf Courses Aeropostale Sports Complexes American Eagle Outfitters Sports Activities Cato...
Page 219
Financial Services POI name ATMs POI name Bank of America Banks BB&T Bank of America Chase BB&T Citibank Chase Citizens Bank Citibank Fifth Third Bank Citizens Bank KeyBank Fifth Third Bank PNC Bank KeyBank RBC Royal Bank PNC Bank Regions RBC Royal Bank SunTrust Regions...
Page 220
Community Services POI name POI name Police Stations Hospitals Post Offices Medical Services Libraries Physicians Schools Tax Services Fire Departments Attorneys Convention Centers Funeral Homes Churches Hair & Beauty Synagogues Cleaning & Laundry City Halls Social Services Civic Centers Communication Court Houses Dentists Government Offices...
Using the Siri Eyes Free When you connect an Apple device that is compatible with Siri to your system via Bluetooth, you can use the Siri Eyes Free. This allows you to perform the functions on your system and Apple device with voice commands so that you can devote your attention to driving. First, make sure that your Apple device supports Siri and that you have activated Siri.
Voice Memo You can use the microphone on the vehicle to record and play voice memos. Running the voice memo On the All Menus screen, press Voice Memo. Voice memo screen Returns to the previous step. Displays the list of recorded voice memos. Starts or pauses the recording.
Page 223
Recording a voice memo On the Voice Memo screen, press It starts recording a voice memo. When recording is finished, press on the screen or press the End Call button on the steering wheel. The voice memo is automatically saved. A To adjust the recording sound volume during voice recording, drag the control bar.
Connect menu on your system. A The UVO service name has been changed to Kia Connect. A You must be an active Kia Connect subscriber or within the initial free trial period to receive Kia Connect services, including Auto Collision Notification.
Page 227
Subscribing to the service You must activate the service to use it on the system. An account with owners.kia.com is required to activate the service. When you do not have an account, create a new account to activate the service. When you already have an account, enter the verification code you received from owners.kia.com.
> See "Checking maintenance service intervals (if equipped)." Call the Kia Connect Center to request help or make inquiries about using the Kia Connect service. Call the Kia Connect Center and request assistance regarding use of the Kia Connect service, including information on subscribing to the Kia Connect service and service activation.
Page 229
> See "Subscribing to the service" A To use the calendar, make sure your user profile is linked to your Kia Connect account. It is not possible to use the calendar if your user profile is set to "Guest." To link your user...
Page 230
Calendar screen Returns to the previous step. Select the account to provide schedule details to. View the schedule details for today or tomorrow. Update with the latest schedule details. The list of menu items appears. Display Off: Turns off the screen. To switch the screen back on, press the screen or briefly press the power button.
Page 231
Press Search Destination. Check the location of the destination and then press Set as Destination. A When you see the search result list, press the desired destination to see on the map. Select a route and press Start Guidance.
Page 232
3 days. A The weather information is accessible only when the system is connected to the network. On the All Menus screen, press Kia Connect > Weather. Weather information screen Returns to the previous step.
Page 233
See the diagnosis results and perform a required function, as follows: To schedule a maintenance service at a preferred Kia dealership or the nearest one, press Schedule Service. To call the Kia Connect center for roadside assistance, press Roadside Assist.
Page 234
Manual on Web (QR Code) and then scan the displayed QR code. Contacting the Kia Connect Center You can contact a Kia Connect Center representative directly to request help or make inquiries about using the Kia Connect services. A The UVO service name has been changed to Kia Connect.
Page 235
To check the modem status, press Modem Status. Using Voice Local Search (if equipped) With Kia Connect, you can search for locations from the online map database by using voice commands. A This function is only available in vehicle models with (3 Button type).
Page 236
After the voice guidance ends and you hear a beep, say the POI name or Address. Type1 Type2 A Depending on the system language, voice recognition may not be supported. 8-12...
A The screen may differ depending on the vehicle model and specifications. A You can use the Kia Connect route to search for a different route while in route guidance. A The road information by the Kia Connect may differ from actual road conditions. Be sure to drive according to actual road conditions and regulations.
Page 239
Settings Configuring system settings Configuring the vehicle settings (Type1/Type2) Configuring the device connections settings (Type1/Type2) Configuring the advanced system settings (Type1) Configuring the button settings (Type1/Type2) Configuring the sound settings (Type1/Type2) Configuring the voice recognition settings (Type1/Type2) Configuring the navigation settings (Type1/Type2) Configuring the UVO settings (Type1/Type2) Configuring the data/network settings (Type2) Configuring the user profile settings (Type1/Type2)
Configuring system settings Configure various functions required for using the system. View information related to the system. Type1 Type2 A The displayed screen or menu items may differ, depending on the vehicle model and features. Check the screen type for your vehicle model and view the appropriate instructions.
Configuring the vehicle settings (Type1) (if equipped) You can configure the functions for driving and related environments. Ý Warning Make sure you stop the vehicle before changing settings to ensure safety. A Vehicle settings can be changed only when the vehicle is on. A Available settings may differ depending on the vehicle model and specifications.
Page 242
Speedometer (if equipped) Can set the driving speed items and colors to display on the head-up display. Driver Assistance (if equipped) You can set to use various systems that assist the driver for safety. A The screen may differ depending on the vehicle model and specifications. Refer to the car owner's manual for details of the function.
Page 243
Driving Convenience (if equipped) Sets the properties of Driving Convenience system. A The Driving Convenience system operates based on the information from the navigation system so you must use the system only when the navigation system operates properly. Highway Driving Assist: Assists driving in a highway according to the set speed and distance to the leading vehicle while keeping the vehicle centered in the lane.
Page 244
Forward Safety (if equipped) Sets the properties of the Forward Safety system. Active Assist: Provides a warning and vehicle control when a risk of forward collision is detected. Ý Warning This function is only a supplemental function and it is not intended to, nor does it replace the need for extreme care and attention of the driver.
Page 245
Ý Warning Safe Exit Assist may not operate properly when a vehicle is coming rapidly two lanes over from your vehicle or a vehicle is approaching at a fast speed from the rear in the lane next to your vehicle. Safe Exit Assist may not operate properly if there is any vehicle or obstacle at the rear area of your vehicle.
Page 246
Ý Warning Even though the vehicle is equipped the Parking Safety system, be sure to check any obstacles in the surroundings while driving. Relying on the Parking Safety system may cause an accident. Accordingly, be sure to control the vehicle by your judgment. When the sensors cannot detect any obstacles due to the detection limit, it may cause an accident.
Page 247
SPORT (EV only) This drive mode enables a more dynamic driving performance. You can change the climate control mode and the active coast energy regeneration level. Drive Mode Change Alert (if equipped) You can set how to display the notification message when the drive mode is changed. Detailed Alert: Displays a detailed notification message along with the vehicle image when the drive mode is changed.
Page 248
Automatic Ventilation (if equipped) You can set to prevent condensation inside and keep inside air pleasant using this feature. Auto Dehumidify: Once the inside air circulation mode has been used for a long time, it is switched to the outside air inflow mode to prevent condensation. Defog/Defrost Options (if equipped) You can set to enable the defogger to secure driver visibility.
Page 249
High Beam Assist (if equipped) You can set to automatically control the high beam when an oncoming vehicle is approaching to decrease the high beam glare. Door (if equipped) You can configure the operation environment for the trunk (liftgate) and doors. A The screen may differ depending on the vehicle model and specifications.
Page 250
Cluster (if equipped) You can set the data to display on the instrument cluster and the volume and type for guiding beep. A The screen may differ depending on the vehicle model and specifications. Service Interval (if equipped) You can set to guide you when to perform the vehicle inspection. Enable Service Interval: Sets the service inspection interval.
Page 251
Cluster Voice Guidance Volume (if equipped) You can adjust the volume of guiding beep. Welcome Sound (if equipped) You can set to generate the notification sound when turning on or off the instrument cluster. Convenience (if equipped) You can configure the features for convenience such as welcome sound and wireless charging.
Page 252
Seat Position Change Alert (if equipped) You can set the system to display a notification message along with the seat image on the screen when a seat position is changed. Smart Posture Care (if equipped) You can see the recommended driving posture according to your physical data, and the clinical inspection result for your waist.
Configuring the vehicle settings (Type2) (if equipped) You can configure the functions for driving and related environments. Ý Warning Make sure you stop the vehicle before changing settings to ensure safety. A Vehicle settings can be changed only when the vehicle is on. A Available settings may differ depending on the vehicle model and specifications.
Page 254
Ý Warning Be sure to always check the road conditions while driving. The Driver Assistance system helps you drive safely and conveniently. Relying solely on the function may cause violation of traffic rules and regulations, resulting in an accident. Be sure to control the vehicle by your judgment and keep traffic regulations for safety.
Page 255
Speed Limit (if equipped) Sets the properties of the Speed Limit system. Speed Limit Offset: Adjusts the offset amount of the speed limit. Speed Limit Assist: Adjusts the vehicle set speed based on the current speed limit of the road.
Page 256
Forward Safety (if equipped) Sets the properties of the Forward Safety system. Forward Cross-Traffic Safety: Provides a warning and emergency braking when a risk of forward cross-traffic collision is detected. Active Assist: Provides a warning and vehicle control when a risk of forward collision is detected.
Page 257
Ý Warning Safe Exit Assist may not operate properly when a vehicle is coming rapidly two lanes over from your vehicle or a vehicle is approaching at a fast speed from the rear in the lane next to your vehicle. Safe Exit Assist may not operate properly if there is any vehicle or obstacle at the rear area of your vehicle.
Page 258
Rear Active Assist: Provides a warning and emergency braking when a risk of rear collision is detected while reversing. Rear Warning Only: Provides a warning when a risk of rear collision is detected while backing up. Off: Disables Parking Safety functions. Rear Cross-Traffic Safety: Provides a warning when a risk of rear cross-traffic collision is detected while reversing.
Page 259
CUSTOM (if equipped) You can set to select the drive mode optimized for the driving habits or road conditions. Powertrain: Select a drive mode that performs optimum engine and transmission control depending on the driving situation. NORMAL: Optimized for balanced comfort. SPORT: Optimized for agile driving.
Page 260
Sport Mode Seat Support (if equipped) Reinforces seat side bolstering to offer a sporty driving experience. Coasting (if equipped) You can enable coasting while driving to improve fuel efficiency. This setting allows the transmission to disengage the engine while driving in ECO mode or SMART mode, provided that the coasting conditions are met.
Page 261
Coasting Guide (if equipped) You can set the system to notify when to release the accelerator pedal to improve fuel efficiency. Start Coasting (if equipped) You can set when to receive the accelerator release notification. Smart Regeneration (if equipped) Set to activate regenerative braking automatically based on the vehicle state or driving conditions.
Page 262
SPORT Mode Display (if equipped) Displays information about sporty driving on the head-up display, in sync with SPORT mode. Head-Up Display (for EV6 only) (if equipped) You can turn on the augmented reality (AR) head-up display function which displays information such as driving speed and road-related information while driving.
Page 263
Display Mode (if equipped) Enable/disable the head-up display, and configure the display mode settings. Display Control (if equipped) Adjust the height, rotation, and brightness of the head-up display. AR Matching Adjustment (if equipped) Adjust settings so that vehicle position on road matches information shown on the head-up display.
Page 264
Energy Consumption Reset (if equipped) You can set to automatically initialize the average fuel economy. After Vehicle On: The average fuel economy is automatically initialize whenever you drive the vehicle. After refueling: The average fuel economy is automatically initialize whenever you refuel the vehicle.
Page 265
Climate (if equipped) You can configure the operation environment for climate control system. A The screen may differ depending on the vehicle model and specifications. Recirculate Air (if equipped) You can set to keep the inside air pleasant by blocking inflow of outside air. Activate upon Washer Fluid Use: Sets to automatically switch to the inside air circulation mode to prevent inflow of washer fluid scent when spraying washer fluid.
Page 266
Heated/Ventilated Features (if equipped) You can set to make the driving environment pleasant by controlling the steering wheel warmer and driver's seat warmer/ventilation. Auto. Controls That Use Climate Control Settings: Automatically controls the heating wire or ventilation for the driver's seat and steering wheel, in sync with the climate control function.
Page 267
Heated/Ventilated Features (if equipped) You can set to make the driving environment pleasant by controlling the steering wheel warmer and driver's seat warmer/ventilation. Auto. Controls That Use Climate Control Settings: Automatically controls the heating wire or ventilation for the driver's seat and steering wheel, in sync with the climate control function.
Page 268
Ambient Light (if equipped) You can set the brightness and color of the ambient light. One Touch Turn Signal (if equipped) You can set the number of turn signal lamp flashes when the lamp lever is operated. Headlight Delay (if equipped) You can set to turn off the taillights and headlights in 15 seconds after turning off the vehicle to ensure visibility.
Page 269
Horn Feedback (if equipped) You can set to generate guiding beep when all doors are locked. Remote Power Doors & Liftgate (if equipped) Easily open the doors by pressing the unlock button on the smart key for more than 3 seconds.
Page 270
Digital Key (if equipped) You can register or delete a digital key and then see the information of the registered digital key. A The screen may differ depending on the vehicle model and specifications. Enable Digital Keys (if equipped) You can set whether or not to use the digital keys. Smartphone Key (if equipped) You can register or delete a smartphone key.
Page 271
Convenience (if equipped) You can configure the features for convenience such as welcome sound and wireless charging. A The screen may differ depending on the vehicle model and specifications. Rear Occupant Alert (if equipped) Movement is detected by the rear-seat sensor after the doors are locked. Advanced Anti-Theft (if equipped) You can set to display an alert when any motion is detected inside the vehicle with the vehicle...
Configuring the device connections settings (Type1) You can manage Bluetooth devices or configure their operation settings. You can also activate the phone projection so that you can control the smartphone Apps on the system screen after connecting the smartphone to the system. On the All Menus screen, press Setup >...
Page 273
Bluetooth Connections You can register or delete a Bluetooth device from the system and connect or disconnect a registered device. A You can add one Bluetooth hands-free kit or up to two Bluetooth audio devices. Auto Connection Priority Set the priority order for automatic Bluetooth connection to the system when it turns on. A On the device list, press on the right and drag the item to reposition.
Android Auto You can activate the Android Auto function to pair your Android smartphone with the system. Apple CarPlay You can activate the Apple CarPlay function to pair your iPhone with the system. Configuring the device connections settings (Type2) You can manage Bluetooth devices or configure their operation settings. You can also activate the phone projection so that you can control the smartphone Apps on the system screen after connecting the smartphone to the system.
Page 275
Device Connections You can register or delete a Bluetooth device from the system and connect or disconnect a registered device. A You can add one Bluetooth hands-free kit or up to two Bluetooth audio devices. A From the device connection screen, press >...
Page 276
Predefined Messages Edit message templates for quick replies. A This option may not be available in some phone models. Bluetooth Voice Prompts Set whether to hear voice prompts for events related to Bluetooth connections. Privacy Mode Enable or disable Privacy Mode. Hide data including contacts and call history from showing up on the system screen to protect privacy.
Page 277
Bluetooth System Info You can see and edit the Bluetooth information of the system. Phone Projection Settings You can activate the phone projection connection function to pair your smartphone with the system. Android Auto You can activate the Android Auto function to pair your Android smartphone with the system. Apple CarPlay You can activate the Apple CarPlay function to pair your iPhone with the system.
Page 278
Bluetooth (if equipped) You can register or delete a Bluetooth device for the system and connect or disconnect a registered device. You can also configure operation settings such as notifications, messages, and other settings for Bluetooth devices. A For more information on how to use the Bluetooth functions: >...
Predefined Messages Edit message templates for quick replies. A This option may not be available in some phone models. Bluetooth Voice Prompts Set whether to hear voice prompts for events related to Bluetooth connections. Privacy Mode Enable or disable Privacy Mode. Hide data including contacts and call history from showing up on the system screen to protect privacy.
Page 280
Return to Map: Set Time You can set the system to automatically display the map screen after a specified period of time when switched to the Radio/Media mode screen while using the navigation. A This function works while driving once a destination has been set. A This feature is not available on the phone projection screen.
Page 281
Custom Button ☆ You can set the frequently used functions by pressing the custom button on the control panel. Set the frequently used functions as custom buttons to access them easily. A The screen may differ depending on the vehicle model and specifications. Steering Wheel MODE Button You can select the media mode to run when the [MODE] button on the steering wheel is pressed.
Page 282
Edit Home Widgets You can edit the types and arrangement of home widgets. A For more information: > see "Editing the widgets on the Home screen (Type1)." Edit Home Icons You can edit the arrangement of home icons. A For more information: >...
Import Address Book from USB Device You can import the location data on a USB device to the system. A The previous location data on the system is to be deleted. A While importing from a navigation system that uses a different coordinate system, the locations may appear differently.
Page 284
TUNE Knob Function You can change the Search knob's function on the map. Changes Stations, Tracks, etc., in the Audio System You can search music or adjust the radio frequency by using the Search knob on the map. Zooms In/Out on the Map You can zoom in or out the map by using the Search knob on the map.
Steering Wheel MODE Button You can select the media mode to run when the [MODE] button on the steering wheel is pressed. A The screen may differ depending on the vehicle model and specifications. Configuring the button settings (Type2) You can configure features to activate when pressing buttons on the control panel or steering wheel.
Page 286
Custom Button ★ (Steering Wheel) (if equipped) Specify the functions that can be activated by pressing the user button on the steering wheel. Set the frequently used functions as custom buttons to access them easily. A The screen may differ depending on the vehicle model and specifications. MODE Button (Steering Wheel) You can select the media mode to run when the [MODE] button on the steering wheel is pressed.
Configuring the sound settings (Type1) You can change the sound settings such as speaker volume and sound effects. A Available settings may differ depending on the vehicle model and specifications. A Some functions may not be available depending on the infotainment system and amplifier specifications on the vehicle.
Page 288
Sound Tuning You can adjust the sound by adjusting the strengths (output levels) for each audio band: Bass, Midrange, and Treble. You can also configure settings so that sound is audible more loudly and clearly at a specific location in the vehicle. A To reset all audio settings to the default values, press Center.
Page 289
System Volumes You can adjust the volume for each system function including phone projection. Subsystem Volumes You can adjust the volume for each system function and initialize all volume settings. A To initialize all system sound settings, press Reset. Connected Device Volumes You can adjust the volume of the phone projection and initialize all volume settings.
Page 290
FM Radio Noise Control You can customize sound quality when listening to FM radio by adjusting background noise of the original sound. Reset You can initialize all the sound settings. Turning on/off the screen touch sound To turn on or off the touch sound on the screen, press Beep at the top of the screen.
Configuring the sound settings (Type2) You can change the sound settings such as speaker volume and sound effects. A Available settings may differ depending on the vehicle model and specifications. A Some functions may not be available depending on the infotainment system and amplifier specifications on the vehicle.
Page 292
Bass Boost (if equipped) Provides magnificent and dynamic sound by amplifying the bass. Quantum Logic Surround (if equipped) Provides the surround sound that can give spatial depth of field as on an actual stage. Centerpoint Surround Technology (if equipped) ® Provides rich surround sound after converting the sound sources such as digital files and satellite radio to stereophonic sound.
Page 293
Guidance Specify the system's guidance voice type, set a certain sound to override other sounds, and configure other guidance sound settings. A The screen may differ depending on the vehicle model and specifications. Guidance Volumes You can adjust the volume levels for individual system features or initialize all volume settings.
Page 294
Active Sound (if equipped) You can turn on the engine sound effect function which plays engine sound. A The screen may differ depending on the vehicle model and specifications. Active Sound Design Adjust the interior engine sound volume. Virtual Engine Sound System (if equipped) Turn on or off the engine sound function which generates a virtual engine sound.
Page 295
Driver Assistance (if equipped) You can set to give priority to the proximity warning feature and lower all other sounds when parking your vehicle. Parking Safety Priority When warning sound is generated while parking, the audio volume decreases to make the sound audible.
Turning on/off the screen touch sound To turn on or off the touch sound on the screen, press Beep at the top of the screen. Configuring the voice recognition settings (Type1) You can change the settings for voice recognition. On the All Menus screen, press Setup > Voice Recognition. The voice recognition settings screen appears.
Configuring the voice recognition settings (Type2) You can change the settings for voice recognition. On the All Menus screen, press Setup > Voice Recognition. The voice recognition settings screen appears. Configure the settings required: A Press > Search for Settings or press and enter a keyword to search for a setting item.
Configuring the navigation settings (Type1) You can configure the navigation settings for navigation operations, screen display, voice guidance, etc. You can also export or import the location data. A For details on how to use navigation functions, see the "Navigation" chapter. >...
Page 299
Display Traffic: Displays nearby traffic information on the map. 3D Buildings: Displays major buildings on the map in three dimensions. Auto-scale: Automatically changes the scale of the map. POI Display: You can specify the icon type to display nearby places on the map. A Press on the right side of Gas/LPG Station to select display options for fuel prices.
Page 300
Auto Re-center Map You can set the system to automatically display the current position when the specified period of time elapses after changing to another position on the map. Guidance You can configure the navigation guidance settings. A The screen may differ depending on the vehicle model and specifications. Show Guidance Distance You can configure settings for displaying the distance to the destination during guidance.
Page 301
Ý Warning Be sure to check the road conditions while driving, because the camera information may get changed occasionally after a map update to the latest version. Relying solely on the driving assist system may cause violation of traffic rules and regulations, resulting in an accident. Camera Alert Distance You can set when to receive alerts against and voice descriptions about traffic enforcement cameras.
Page 302
Previous Destinations Settings You can set to automatically save the previous destination and display the previous destinations when the navigation system starts. Save Previous Destinations: The previous destination is automatically saved. Show Previous Destinations after Navigation Start-up: When the navigation system starts, the list of recent destinations appear on a pop-up window.
GPS Information You can see the GPS satellite status and coordinates of the current position. The following information appears: Can see the reception status of the satellite signals. Receiving: Satellite signals are being received and the current position is recognized. Searching: The system is scanning the satellite signals.
Page 304
(if equipped) You can specify the items to display on the map. A The screen may differ depending on the vehicle model and specifications. Map Display You can specify the items to display on the map. Map View: Set the navigation map display mode. To automatically rotate the map screen based on the driving direction, select 2D Heading Up.
Page 305
Set Map Auto-scale You can set the scales for each vehicle speed zone A For example, when "700 ft" is selected for the "21-40 mi/h" zone and "0.25 mi" for the "41–60 mi/h" zone, the map scale on the navigation screen becomes 700 ft when vehicle speed is 40 mi/h and 0.25 mi when vehicle speed is 41 mi/h.
Page 306
Fuel Price Information (if equipped) When displaying gas stations or LPG charging stations on the map, the fuel prices below a specific range can be displayed. A Select Display Fuel Price Info on Map to view recommended fuel prices based on the prices offered in the area.
Page 307
Border Crossing Information You can set whether or not to display the border crossing information on the screen. Show Route Overview While Stopped You can set to display the route overview from the start point to the destination when the vehicle is stationary.
Page 308
Others You can configure navigation options, e.g., turning on or off fuel prices, exporting or importing places from and to Saved Places. A The screen may differ depending on the vehicle model and specifications. Previous Destinations Settings You can set to automatically save the previous destination and display the previous destinations when the navigation system starts.
Page 309
User Data You can import location data from a USB device to the system, or export the data on the system to a USB device. A When importing or exporting the location data, you can uses only the USB device formatted in exFAT, FAT16/32, or NTFS.
Configuring the UVO settings (Type1) You can subscribe to the UVO service or see the modem information. On the All Menus screen, press Setup > UVO. The UVO settings screen appears. Configure the settings required: A Press Menu > Search for Settings or press and enter a keyword to search for a setting item.
Page 311
Read the terms of use and press Accept. When an airbag is deployed, the system automatically makes a call to 911 and sends your location to the 911 operator. A The feature is activated and appears at the top right of the screen. Modem Information You can check the modem information for use of the UVO service.
Configuring the UVO settings (Type2) (if equipped) You can subscribe to the UVO service or see the modem information. On the All Menus screen, press Setup > UVO. The UVO settings screen appears. Configure the settings required: A Press > Search for Settings or press and enter a keyword to search for a setting item.
Page 313
Read the terms of use and press Accept. When an airbag is deployed, the system automatically makes a call to 911 and sends your location to the 911 operator. A The feature is activated and appears at the top right of the screen. Modem Information You can check the modem information for use of the UVO service.
(Type2) (if equipped) You can change the data network settings, including Kia Connect and Wi-Fi Hotspot. A Available settings may differ depending on the vehicle model and specifications. A The displayed screen or name may differ depending on the vehicle model and specifications.
Configuring the user profile settings (Type1) (if equipped) You can additionally set profiles for each driver after First Run Setup. On the All Menus screen, press Setup > User Profile. Press the user to change its profile. The User Profile Settings screen appears. A Press Menu >...
Link Bluetooth Devices You can connect any registered Bluetooth device. > See "Connecting a Bluetooth device." Reset User Account You can initialize all account settings. Configuring the user profile settings (Type2) You can additionally set profiles for each driver after First Run Setup. On the All Menus screen, press Setup >...
Link Kia Connect Account You can use various services and convenient management features when linked to the registered Kia Connect service. A Subscribe to Kia Connect to check the function. > See "Subscribing to the service." Link Bluetooth Devices You can connect any registered Bluetooth device.
Page 318
System Info You can check the system storage space. You can also use your smartphone to access the online user's manual of the system, or initialize all system settings to default values. Storage You can check the storage space of the system memory where voice memos can be saved. User's Manual on Web (QR Code) You can access the online user's manual of the system by scanning the QR code with your smartphone.
Page 319
My Data You can import location data from a USB device to the system, or export the data on the system to a USB device. A When importing or exporting the location data, you can use only the USB device formatted in exFAT, FAT16/32 or NTFS.
Page 320
GPS Time After receiving the time from GPS, it sets the system date and time automatically. A To manually set the date and time, uncheck GPS Time, press the current date and time below GPS Time, and then set the date and time. 24 Hours The system time is displayed in the 24-hour format.
Page 321
Keyboard You can change the keyboard type for each language to use when entering the text. English Keyboard You can select the keyboard type to use when entering the English text. Default Keyboard You can select the default keyboard type. Units (if equipped) You can specify the units to display on the system screen.
Configuring the general system settings (Type2) You can configure general settings for date, time, language, and the like. You can also check information of the system. On the All Menus screen, press Setup > General. The general settings screen appears. Configure the settings required: >...
Page 323
Storage You can check the storage space of the system memory where voice memos can be saved. User's Manual on Web (QR Code) You can access the online user's manual of the system by scanning the QR code with your smartphone.
Page 324
Date & Time You can set the system date and time automatically or manually. You can also set the time display mode. GPS Time After receiving the time from GPS, it sets the system date and time automatically. A To manually set the date and time, uncheck GPS Time, press the current date and time below GPS Time, and then set the date and time.
Page 325
Language You can set the system display language. A Once the language has been changed, it takes a while to apply the new language to the system. The notification pop-up window appears as soon as the new language is applied to the system.
Page 326
Units (if equipped) You can specify the units to display on the system screen. A The displayed screen or name may differ depending on the vehicle model and specifications. Distance and Speed You can select the units for distance and vehicle speed to display on the screen. Temperature You can select the temperature unit to display on the screen.
Page 327
Media Options (if equipped) You can set the media player not to start automatically when starting the engine or set it to notify you of any information changes during media playback. Radio/Media Off at Vehicle Startup You can set the media player not to start automatically when starting the engine. Display Media Change Notifications You can set the system to briefly display media information at the top of the screen if the current song or channel changes when not on the main media screen.
Configuring the screen layout settings (Type2) (if equipped) You can configure the settings for the display and themes. A Available settings may differ depending on the vehicle model and specifications. A The displayed screen or name may differ depending on the vehicle model and specifications.
Analog Clock Displays the analog clock on the system screen saver. A Press to choose the Analog Clock to show on the screen. Digital Clock Displays the digital clock on the system screen saver. None Displays nothing on the system screen saver. Split Screen You can specify the items to display on the Split Screen.
Page 330
Illumination You can set the system to automatically adjust the display brightness depending on the ambient light intensity. You can also set the system to keep the display bright or dark all the time. You can set to automatically adjust the display brightness depending on the cluster illumination.
Page 331
Blue Light Filter Enable blue light filtering to adjust the screen light to reduce the level of eye strain. Use Blue Light Filter Enable or disable blue light filtering. Blue Light Filter Settings Set to activate blue light filtering automatically based on the ambient light or pick the time range manually.
Page 332
Home Screen You can change the layout of the Home screen. Edit Home Widgets You can edit the types and arrangement of home widgets. A For more information: > see "Editing the widgets on the Home screen (Type1)." Edit Home Icons You can edit the arrangement of home icons.
Page 333
Media Change Notifications You can set to briefly display media information at the top of screen while playing the next item when you move from the media player screen to another. Extend Rear Camera Use You can set to display the rear camera display even when you change the shift position other than "R"...
Reset You can initialize all display settings such as brightness. Configuring the display settings (Type2) You can change the system display settings such as display brightness. On the All Menus screen, press Setup > Display. The display settings screen appears. Configure the settings required: A Press >...
Page 335
Illumination You can set the system brightness to be adjusted according to the ambient lighting conditions or set the screen to stay bright or dimmed. You can also set to automatically adjust the display brightness depending on the cluster illumination. A The screen may differ depending on the vehicle model and specifications.
Page 336
Blue Light Filter Enable blue light filtering to adjust the screen light to reduce the level of eye strain. A The screen may differ depending on the vehicle model and specifications. Use Blue Light Filter Enable or disable blue light filtering. Blue Light Filter Settings Set to activate blue light filtering automatically based on the ambient light or pick the time range manually.
Page 337
Screen Saver (if equipped) You can select the items to display on the screen saver in standby mode. Analog Clock Displays the analog clock on the system screen saver. A Press to choose the Analog Clock to show on the screen. Digital Clock Displays the digital clock on the system screen saver.
Page 338
Split Screen (if equipped) You can specify the items to display on the Split Screen. A The screen may differ depending on the vehicle model and specifications. A This option is only available when the display supports Split Screen. A On the screen list, press on the right and drag the item to reposition.
Configuring the media settings (Type1) (if equipped) Set to receive a notification when the information changes during playback or to include sub- folders when playing a folder on repeat. On the All Menus screen, press Setup > Media. The media settings screen appears. Configure the settings required: Media Change Notifications You can set to briefly display media information at the top of screen while playing the next...
A After update is completed, the system automatically restarts and the SW Info/Update screen displays the updated version. A During update, you cannot use the navigation system, Kia Connect service, camera, and infotainment system. A For assistance concerning the update, contact the Customer Center at 800-333-4 KIA(4542).
Page 341
Updating the software and map Connect a USB device to the computer and run Navigation Updater for downloading the update files. Follow the instructions on the screen to download the update files. Remove the USB device from the computer and then connect it to the USB port in your vehicle.
Page 342
[ Background Update You can perform update while using the system. On the SW Info/Update screen, press Update. Press Background Update. Press OK. A Compared to Update Now, it may take longer. A On the All Menus screen, press Setup > General > SW Info/Update to see the update progress.
Page 343
A Make sure that a USB device with update files is connected to the system before turning off the vehicle. A When you set the update time to "0", the update notification window appears and then the update starts. To close the notification window and proceed with the update, press Yes. To cancel the update, press No.
Page 346
After installation of the software is complete, you can view the update details from the notification window. A To use the wireless update function, you need to subscribe to the Kia Connect service. > See "Subscribing to the service."...
Page 347
You can update the navigation map and infotainment system quickly regardless of whether the vehicle is on or off. A This function is available only when the system is ready for the latest software update. A When update is in progress, the navigation, Kia Connect, camera and infotainment system are disabled. 10-3...
Page 348
On the All Menus screen, press Setup > General > SW Info/Update > Finalize Update. Select Update Now and press OK. The update is performed immediately after the system reboots. Scheduling an update You can update the navigation map and infotainment system when the vehicle is not used after being turned off.
Page 349
Select Update After Vehicle is Turned Off. Set the time to perform update and press OK. When the update timer is set, the icon appears at the top right of the screen. A You can set to start the update within 12 hours or less after the vehicle is stopped. For example, if you set the update timer to "+3,"...
Solutions Before reporting a malfunctioning system, refer to the following table and see if you can identify and fix the problem. If the problem persists or you are unable to locate your specific need, contact your place of purchase or dealer. Sound and display Symptom Possible cause...
Page 353
Symptom Possible cause Solution The image quality is Screen adjustment On the All Menus screen, navigate to Setup > Display and use the settings menu to poor. is required. adjust the display settings. Vibration occurs in The images may get distorted when vibration the system.
Page 354
USB playback Symptom Possible cause Solution Files in a USB device There are no Copy the files that can be played by the cannot be played. compatible files for system to the USB device and connect the playback device again. >...
Page 355
Bluetooth connection Symptom Possible cause Solution The system is Registration mode On the All Menus screen, navigate to Setup not detected by a needs to be run. > Device Connections, run the device Bluetooth device. registration mode and then perform search again from the device.
Page 356
Phone projection Symptom Possible cause Solution The phone Phone projection is Visit the website to check whether your projection function not supported. smartphone supports the phone projection. is not performed Android Auto: https://support.google. when a smartphone com/androidauto is connected using a Apple CarPlay: http://www.apple.com/ USB cable.
Page 357
System operation Symptom Possible cause Solution The previous media It is encountered When the media source is not connected or mode does not with poor media played normally, the previous mode appears. appear when the connection or Connect the media source again or play it system is turned off playback error.
Page 358
Navigation system operation Symptom Possible cause Solution The destination is Outdated map data Update the map to the latest version. not searched. > See Navigation Update site, "How to Update the Map and Software for your Infotainment System," "Wireless update (if equipped)." Route guidance Outdated map data Update the map to the latest version.
System status indicator icons You can see the system status by checking the status indicator icons at the top right of the system screen. Different status indicator icons appear when each function is performed. The meanings of the icons are as follows: Mute/memo recording Navigation sound muted Radio/Media sound muted...
Page 360
Talking with a UVO phone UVO phone's microphone off UVO network's signal strength 911 Connect activated Kia Connect (if equipped) Talking with a Kia Connect phone Kia Connect phone's microphone off Kia Connect network's signal strength 911 Connect activated Wi-Fi Hotspot (if equipped)
Page 361
Available functions in the rear seat (if equipped) Rear-seat remote control locked Rear-seat sleep mode On Front-seat driver is having a conversation with a rear-seat occupant Wireless charging Wireless charging in progress Wireless charging complete Wireless charging failure A Some icons may not appear depending on the vehicle model and specifications. 11-11...
Navigation How can I update the map? You can download the latest map data to a USB device and use the device to update the map. > See Navigation Update site, "How to Update the Map and Software for your Infotainment System,"...
Page 363
I bought a new mobile phone and want to replace my old phone with the new one to connect the system. How can I register the new phone to the system? An additional device can be registered in the same way as in registration of a new device.
Product specifications Media player USB mode [ Music files Item Specifications File format MPEG-1/2 Layer3, OGG (Vorbis), FLAC, WMA (Standard/Professional), Bit-rate and 8–320 kbps (CBR/VBR), up to 48 kHz sampling frequency (ID3 tag version: Ver. 1.0, Ver. 1.1, Ver. 2.2, Ver. 2.3, Ver. 2.4) Q1 to Q10, up to 48 kHz FLAC...
Page 365
A The following files are not played. Modified files (format-changed files) Variant files (e.g. MP3 files encoded by WMA audio codec) DRM (Digital Rights Management)-protected files Files with no index A Sound quality is not guaranteed in case of music files that use the bit-rate exceeding 192 kbps.
Page 366
Common specifications Item Specifications Power supply DC 14.4 V Operating voltage DC 9-16 V Dark current Below 1 mA in average within 45 days Operating temperature -20 to +70 ℃ range Storage temperature -40 to +85 ℃ range Electric current 2.5 A consumption Radio...
Important information Before using your system, read and follow all instructions and safety information provided in this user's guide ("User's Manual"). Not following precautions found in this guide can lead to an accident or other serious consequences. Keep this guide in your vehicle When kept in the vehicle, this guide will be a ready reference for you and other users unfamiliar with the system.
Page 370
Navigation features Navigation features included in the system are intended to provide detailed instructions to get you to a desired destination. Ensure that all persons using this system carefully read and follow all instructions on safety information. Distraction hazard Some navigation features may require manual (non-verbal) setup. Attempting to perform such setup or inputting data while driving can seriously distract your attention and could cause an accident.
Index Advanced system settings 9-41 Climate Climate settings 9-9, 9-27 Android devices Android Auto 2-5 Climate control function 2-14 Apple devices Component names and functions Apple CarPlay 2-7 Control panel Custom button 1-3 MAP button 1-2 MEDIA button 1-2 NAV button 1-2 Battery warning 1-7 POWER button/VOLUME knob 1-2 Bluetooth...
Page 372
Winter Mode 2-41 EV charging stations 5-29 Kia Connect Kia Connect menu Diagnosing the vehicle 8-9 Bluetooth 11-12 Kia Connect Center 8-10 Broadcast reception 11-13 Maintenance service 8-10 Navigation 11-12 Roadside Assistance 8-5 Route guidance service 8-13 Self-inspection method upon failure...
Page 373
Listening to music Radio Bluetooth audio 4-8 Changing the channel 3-7, 3-8 USB music 4-2 Changing the radio mode 3-6 Deleting a channel 3-10 Location registration 5-23 Saving radio channels 3-9 Scanning channels 3-7, 3-8 Rear-seat climate control function 2-17 Map 5-6 Rear-seat conversation mode 2-19 Map update 9-102...
Page 374
SiriusXM™ Changing to SiriusXM mode 3-13, 3-14 Update 9-102 Featured Favorites channels 3-19 USB file specifications 11-14 Searching for channels 3-16 USB music 4-2 Selecting channels 3-17 Viewing the program schedule 3-18 USB port 4-2 Software update 9-102 USB storage device specifications 11-15 Solutions Bluetooth connection 11-5 UVO menu...
Wireless Technology. The ® Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. Other trademarks and trade names are those ® of their respective owners. A Bluetooth enabled cell phone is ®...
Open Source Information This system contains open source software. To obtain the source code developed under the open source license installed on this product, please visit http://en.mobis.co.kr/opensource/list.do. You can download all applicable license notices, including the source code. If you send an e-mail to MOBIS_OSSrequest@mobis.co.kr within three years of purchasing this product to request an open source code for the software on this product, you will receive it in CD-ROM and other storage mediums with minimal charge, such as costs for medium and transportation.