Kia EV6 Manual page 379

Driving your vehicle
5. If you need to change the vehicle's
position or location, manually com-
plete parking your vehicle.
NOTICE
僅 When operating Remote Smart Park-
ing function, make sure all smart keys
are outside of the vehicle.
僅 Remote Smart Parking function will
operate only when the smart key is
within 4 m (13 ft.) from the vehicle. If
there is no vehicle movement even
when the Remote Forward or Back-
ward button is pressed on the smart
key, check the distance to the vehicle
and press the button again.
僅 The detecting range of the smart key
may vary depending on the surround-
ings that are affected by radio waves
such as transmission tower, broadcast
station, etc.
僅 The parking location indicator is dis-
played on Surround View Monitor
screen and is displayed until the vehi-
cle enters the parking space for the
first time by Remote Smart Parking
function.
僅 Depending on parking environments,
if the vehicle is stopped by a stopper,
parking may be completed.
WARNING
僅 When using Remote Smart Parking
function, make sure that all passen-
gers have gotten out of the vehicle.
僅 After ending or turning off Remote
Smart Parking function, before leav-
ing the vehicle, close windows and
sunroofs, and make sure the vehicle is
off before locking the doors.
Remote Smart Parking Assist (RSPA)
Smart Parking function
Operation status
The turn signal of the parking direction
Under control
blinks until the first reverse is complete.
Opera- Hazard
Smart key
tion sta- warning
LED
tus light
Green LED
Under
continuously
control
blinks
Red LED con-
Pause tinuously Blinks
blinks
Red LED illu- Blinks 3
minates for 4 times
Off
seconds and and
then turns off turns off
Green LED
illuminates for Blinks 1
Complete 4 seconds time and
and then turns off
turns off
NOTICE
僅 Operation status by the hazard warn-
ing light may not be applicable based
on the regulation of your country.
僅 If the smart key is not within the oper-
ating range from the vehicle (approxi-
mately 4m (13 ft.)), the smart key LED
will not illuminate or blink. Use the
smart key within the operating range.
How to turn off Parking function
while operating
僅 Press the Parking Safety ( ) button
or select Cancel on the infotainment
system screen to turn off.
僅 Press the Parking Safety ( ) button in
Searching for parking space and
Select parking type stage.
僅 Shift the gear to R (Reverse) in the in
Searching for parking space, Select
Turn signal
Turn signal
The turn signal of the
parking direction blinks
-
until the first reverse is
complete.
-
-
-
6 171
6