Advertisement

Quick Links

All manuals and user guides at all-guides.com
PETROL DRIVEN WATER PUMP
Model Nos: PW2 & PW3
PART NOS: 7140640 & 7140645
OPERATING & MAINTENANCE
INSTRUCTIONS
GC01/14

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PW2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Clarke PW2

  • Page 1 All manuals and user guides at all-guides.com PETROL DRIVEN WATER PUMP Model Nos: PW2 & PW3 PART NOS: 7140640 & 7140645 OPERATING & MAINTENANCE INSTRUCTIONS GC01/14...
  • Page 2: Environmental Protection

    All manuals and user guides at all-guides.com INTRODUCTION Thank you for purchasing this CLARKE Petrol Driven Water Pump. Before attempting to use the machine, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to the pump giving you long and satisfactory service.
  • Page 3: General Safety Rules

    All manuals and user guides at all-guides.com GENERAL SAFETY RULES As with all machinery, there are certain hazards involved with its operation and use. Exercising caution will reduce the risk of personal injury. ALWAYS observe all safety precautions for the handling of fuel. ALWAYS thoroughly familiarise yourself with this unit &...
  • Page 4 The pumps are fitted with an open impeller. The suction strainer supplied, must always be used, to ensure that large stones or other objects cannot be drawn up, as this would cause severe damage to the pump. The images show a PW3 pump although PW2 pumps are similar.
  • Page 5: Before Use

    All manuals and user guides at all-guides.com BEFORE USE REMEMBER: Contaminated water is water containing small solids in suspension, NOT slurry, sludge, sand, or mud. Place the pump on a firm foundation and as near to the water source as possible. Ensure there is adequate drainage for the discharged water, and that there is no danger of damage to property as a result of the pumping operation.
  • Page 6 All manuals and user guides at all-guides.com GENERAL USE OF THE PUMP Connect the suction and discharge hoses to the pump housing using the hose clamps and gaskets supplied to achieve an airtight seal. There must be no damage of any kind to the hoses which must be well protected and supported.
  • Page 7 All manuals and user guides at all-guides.com OPERATION (REFER TO THE ILLUSTRATION ON PAGE 4) WARNING: WHEN THE ENGINE IS RUNNING, THE EXHAUST MUFFLER IS VERY HOT, TAKE CARE TO AVOID BURNS. WARNING: NEVER RUN THE ENGINE IN AN ENCLOSED SPACE - ENSURE THERE IS ADEQUATE VENTILATION.
  • Page 8: Maintenance

    Clearance should be 0.70-0.80mm. The recommended spark plug for both the PW2 and PW3 pump is RK34200/168F. CHANGING THE OIL The oil in the engine should be changed after the first 20 hours use and thereafter every 6 months or 100 running hours.
  • Page 9: Troubleshooting

    All manuals and user guides at all-guides.com TROUBLESHOOTING s l i l l i . y r c t i c t i t i s t i s c t i t i s l i t t l u .
  • Page 10: Parts And Servicing

    PARTS AND SERVICING or spare parts and service, please contact your nearest dealer, or CLARKE International, on one of the following numbers. PARTS & SERVICE TEL: 020 8988 7400 PARTS & SERVICE FAX: 020 8558 3622 e-mail as follows: PARTS: Parts@clarkeinternational.com...
  • Page 11: Specifications

    All manuals and user guides at all-guides.com SPECIFICATIONS n i l n i l n i l n i l y t i y t i y t i t e l " 2 " 3 o l f ) l l...
  • Page 12: Pump Parts Diagram

    All manuals and user guides at all-guides.com PUMP PARTS DIAGRAM MODEL - PW2...
  • Page 13: Pump Parts List

    All manuals and user guides at all-guides.com PUMP PARTS LIST Model - PW2 ItemPart Description 114 RK41100 23” Frame sub-assy. 115 GB/T923-88 Nut M6 116 RK41310 Rubber 117 GB/T5787 Bolt, M6×12 118 GB/T6170 Nut, M8 119 GB/T5787 Bolt, M8×32 120 RK44112...
  • Page 14 All manuals and user guides at all-guides.com ENGINE PARTS DIAGRAM-MODEL PW2...
  • Page 15 All manuals and user guides at all-guides.com PARTS LIST-MODEL PW2 ENGINE Item Part Description RK14711/168F Intake valve RK14755/168F Valve spring RK14751/168F Intake valve spring seat RK14757/168F Exhaust valve spring seat RK14758/168F RK12254/168F Inlet gasket RK16141/168F Connecting block RK16142/168F Carburetor gasket...
  • Page 16 All manuals and user guides at all-guides.com PUMP PARTS DIAGRAM MODEL - PW3...
  • Page 17 All manuals and user guides at all-guides.com PARTS LIST - MODEL PW3 PUMP MODEL - PW3 Item Part Description 114 RK41100 23” Frame sub-assy. 115 GB/T923-88 Nut M6 116 RK41310 Rubber 117 GB/T5787 Bolt, M6 × 12 118 GB/T6170 Nut, M8 119 GB/T5787 Bolt, M8 ×...
  • Page 18 All manuals and user guides at all-guides.com PARTS DIAGRAM - PW3 ENGINE...
  • Page 19 All manuals and user guides at all-guides.com PARTS LIST- MODEL PW3 ENGINE ItemPart Description ItemPart Description RK14415/168F Adj bolt for valve gap RK11212/168F Oil drain plug RK14410/168F Valve rocker assy RK11213/168F Washer RK14261/168F Pusher guide GB276-89 Bearing 6205 RK14250/168F Pusher RK13180/168F Crankshaft oil seal RK14455...
  • Page 20 All manuals and user guides at all-guides.com DECLARATION OF CONFORMITY - PW2...
  • Page 21 All manuals and user guides at all-guides.com DECLARATION OF CONFORMITY - PW2...
  • Page 22 All manuals and user guides at all-guides.com DECLARATION OF CONFORMITY - PW3...
  • Page 23 All manuals and user guides at all-guides.com DECLARATION OF CONFORMITY - PW3...
  • Page 24 All manuals and user guides at all-guides.com...

This manual is also suitable for:

Pw371406407140645

Table of Contents