Sennheiser ew 100 G3 Series Instruction Manual page 15

All manuals and user guides at all-guides.com
Adjusting settings via the operating menu
Overview of the frequency banks and channels:
Frequency bank Channels
"1" to "20" up to 12 per
frequency bank
"U" up to 12
When setting up multi-channel systems, please observe the
following:
Only the factory-preset frequencies within one frequency bank
("1" to "20") are intermodulation-free. It is vital to observe the
notes on frequency selection on page 17.
Entering a name – "Name"
SET
Name
Menu
L i c h a e l
Name
L i c h a e l
Call up "Name" Enter a character
and confirm
"Stored"
Via the "Name" menu item, you can enter a freely selectable name (e.g. the
name of the performer) for the plug-on transmitter.
The name can be displayed on the "Frequency/Name" and
Channel" standard displays (see page 9). The name can consist of up to 8
characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Press the UP/DOWN button to select a character.
Press the SET button to change to the next segment/
SET
character or to store the complete entry.
Activating/deactivating the automatic lock mode – "Auto Lock"
SET
Auto Lock
Menu
Auto Lock
Active
A c t i v e
Call up Select the desired
"Auto Lock" setting
"Stored"
The lock mode prevents that the plug-on transmitter is accidentally
switched off or programed during operation. The lock mode icon
the current standard display indicates that the lock mode is activated.
Press the UP/DOWN button to select the desired setting.
For information on how to use the lock mode, refer to page 8.
14
Type
System bank:
frequencies are factory-preset
User bank:
frequencies are freely selectable
SET
Name
Michael
Enter a character;
store the setting
SET
"Name/
Auto Lock
I n a c t i v e
Store the setting
SET
on