Declaration Of Performance; Declaration Of Conformity - Hornbach Catania 10468366 Installation And User Manual

Declaration of performance

DOP-104767781-CPR (Version 20220103)
1. Unique identification code of product type:
-
Cassette awning Catania 3 x 2 with motor and
LED lighting (10468366)
-
Cassette awning Catania 3.5 x 2.5 with motor
and LED lighting (10468367)
-
Cassette awning Catania 4 x 3 with motor and
LED lighting (10468368)
-
Cassette awning Catania 5 x 3 with motor and
LED lighting (10468369)
-
Cassette awning Catania 6 x 3 with motor and
LED lighting (10468370)
2. Type, batch or serial number or other label for the
identification of the product referred to in Article 11
/ Paragraph 4:
10468366, 10468367, 10468368, 10468369, 10468370
3. The manufacturer's intended use or intended uses
of the product in accordance with the applicable
harmonized technical specification:
Application in the exterior of buildings and other
structures
4. Name, registered trade name or registered trade
mark and contact address of the manufacturer in
accordance with Article 11 / Paragraph 5:
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim/Germany
www.hornbach.com
5. Where appropriate, the name and contact address
of the authorized representative, responsible for the
tasks referred to in Article 12 / Paragraph 2:
Not relevant

Declaration of conformity

Hereby, HORNBACH Baumarkt AG declares that the ra-
dio equipment type "remote control" is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address:
www.hornbach.com/productcompliance
6. System or systems for the assessment and verifica-
tion of the reliability of performance of the product
according to Annex V of the Construction Products
Directive:
System 4
7. Not relevant (for System 4 there is no notified
body).
8. Not relevant.
9. Declared performance
Main features Performance
Resistance to Class 2
wind loads
Total energy NPD
dissipation g
tot
10. The performance of the above product corresponds
to the declared performance/s as defined in No. 9.
The above manufacturer is solely responsible for
the preparation of the service declaration in accord-
ance with Regulation (EU) No. 305/2011.
Signed for the manufacturer and on behalf of the manu-
facturer by:
Andreas Back
Head of Quality Management, environment & CSR
Person authorised to compile the technical file
Bornheim, 03.01.2022
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
Harmonized techni-
cal specification
EN 13561
ENGLISH | 163