Vestil FMDL Series Manual

Vestil FMDL Series Manual

Single & double eagle beak fork-mounted drum lifters
Hide thumbs Also See for FMDL Series:

Advertisement

Quick Links

Table of Contents
FMDL-Series Single & Double Eagle Beak Fork-Mounted Drum Lifters
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine whether
it sustained damage during transport. If damage is discovered, record a complete description of it on the bill
of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels, and
accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can also be
contacted online at https://www.vestil.com/page-parts-request.php.
Electronic copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
manuals.php.
Specifications.....................................................................................................................................
Signal
Words.......................................................................................................................................
Safety
Instructions..............................................................................................................................
FMDL-1 Exploded View and Bill of
FMDL-2 Exploded View and Bill of
FPDL-11-H Exploded View and Bill of
FPDL-8-L Exploded View and Bill of
DFDL-3 Exploded View and Bill of
Centers of Gravity
Diagrams............................................................................................... 8, 9,
Using the
Lifter....................................................................................................................
Record of Satisfactory
Inspections &
Maintenance................................................................................................
Labeling
Diagram.............................................................................................................
Optional
Equipment.......................................................................................................... 13, 14,
Limited
Warranty...............................................................................................................
Table of Contents
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
TABLE OF CONTENTS
Materials..........................................................................
Materials......................................................................................
Materials......................................................................
Materials........................................................................
Materials......................................................................................
Condition........................................................................................
Copyright 2023 Vestil Manufacturing Co.
Rev. 9/25/2023
Vestil Manufacturing Company
Fax: (260) 665-1339
www.vestil.com
FMDL MANUAL
info@vestil.com
https://www.vestil.com/page-
PAGE
10, 16, 17
11
11
12
12
15, 16, 17
18
Page 1 of 20
2
2
2
3
4
5
6
7
-
12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FMDL Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vestil FMDL Series

  • Page 1 Centers of Gravity Diagrams………….………………………………………………………………..…..8, 9, 10, 16, 17 Using the Lifter.……………..……………………………………………………………………………..…... Record of Satisfactory Condition……………………………………………………………………………. Inspections & Maintenance…...………………………………………………………………………….….. Labeling Diagram…………………………….………………………………………………………………… Optional Equipment……………………………………………………………………………………….…... 13, 14, 15, 16, 17 Limited Warranty…………………………………………………………………………………………...…… Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 1 of 20...
  • Page 2: Specifications

    FMDL MANUAL SPECIFICATIONS A specifications document for your drum carrier model is available on the Vestil website: www.vestil.com. Specifications include dimensions, net weight, and capacity information. To access the appropriate specifications document, navigate to the appropriate webpage: a) FMDL-1 and FMDL-2 = https://www.vestil.com/product.php?FID=774;...
  • Page 3: Safety Instructions

    FMDL MANUAL SAFETY INSTRUCTIONS Vestil strives to identify foreseeable hazards associated with the use of its products. Material handling is dangerous and no manual can address every conceivable risk. The end-user must exercise sound judgment at all times. Acquire a copy of the latest version of ANSI B56.1from www.ITSDF.org.
  • Page 4 NOTE: In order for the Eagle Beak™ mechanism to work properly, the drum and its contents must weigh AT LEAST 50 lb. (~22.7kg). Exploded View of 40-514-022 Quick link Attach hook of ratchet strap Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 4 of 20...
  • Page 5 ” - 20 45286 Clip, hitch pin, ” x 2 ” 40-014-029 Frame, bar, formed Bolt, hex head, ” - 20 x 40-016-052 Upper jaw, Eagle Beak™ 11003 ” Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 5 of 20...
  • Page 6 DRUM GRIPPER L.S. ASSEMBLY, FRAME, 40-514-013 DRUM GRIPPER R.S. WELDMENT, FRAME, 40-514-021 DRUM SUPPORT Quick link STRAP WITH 40-145-008 RATCHET, 6' LONG, 2 HOOKS 10 33-112-023 PIN, CLEVIS Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 6 of 20...
  • Page 7 EXTENDED PRONG COTTER PIN, 65078 ZINC FINISH, 1/8" x 1 1/2" 40-146-001 SPRING, TENSION 40-112-026 CLEVIS PIN, Ø5/8" x 2 1/2" 33018 USS FLAT WASHER, Z PLATED, Ø 3/4" Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 7 of 20...
  • Page 8 (~27.0 cm) from the top of the fork pockets. NOTE: In order for the Eagle Beak™ mechanism to work properly, each drum and its contents must weigh AT LEAST 50 lbs. (~22.7kg). Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 8 of 20...
  • Page 9  14¼ inches (~36.2cm) from the outer edge of each fork pocket (halfway between the fork pockets). Vertical center of gravity:  9 inches (~24.0cm) from the bottom of the fork pockets. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 9 of 20...
  • Page 10  13¼ inches (~33.7cm) from the outer edge of each fork pocket (halfway between the fork pockets). Vertical center of gravity:  11 inches (~23cm) from the bottom of the fork pockets Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 10 of 20...
  • Page 11: Using The Lifter

    Step 7 Release the drum: First tilt the mast forward and then slowly lower the forks until the drum is fully supported by the floor. To finish disengaging the drum, back the fork truck away from it. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 11 of 20...
  • Page 12: Inspections & Maintenance

    Inspection procedures are included in the most current revision of ANSI/ITSDF B56.1. As stated in the NATIONAL STANDARDS section on p. 6, Vestil recommends that you acquire a copy of the most recent revision of this standard. Apply all use and maintenance/care instructions in the standard. Vestil also recommends that you contact your local occupational health and safety authority to determine if any state or local laws, regulations, codes, ordinances, etc.
  • Page 13: Maintenance

    A “modification” is a change that alters the drum carrier from satisfactory condition, like bending the structural members or removing a part or several parts. NEVER modify the unit without the express, written approval of Vestil. Modifications might make the device unsafe to use and automatically void the LIMITED WARRANTY.
  • Page 14: Labeling Diagram

    CONDITION. Replace all labels that are damaged, missing, or not easily readable (e.g. faded). Order replacement labels by contacting the REPLACEMENT PARTS DEPARTMENT online at https://www.vestil.com/page-parts-request.php. Alternatively, you may request replacement parts and/or service by calling (260) 665-7586 and asking the operator to connect you to the Parts Department.
  • Page 15: Optional Equipment

    ” x 1 ” Pin, self-locking, 99-112-004 quick release 08-145-041 Snap hook, ” 09-145-018 Chain, ” x 56” Bumper belt 40-001-098 subassembly Bumper belt subassembly exploded view provided on p. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 15 of 20...
  • Page 16 SAE flat washer, ” Weldment, frame, 40-612-010 Weldment, pin, roller axle 40-514-104 bracket, roller mount SAE flat washer, 1 ” ID x 33095 40-146-006 Spring, compression 2” OD Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 16 of 20...
  • Page 17 ” x 1 ” Pin, self-locking, 99-112-004 quick release 08-145-041 Snap hook, ” 09-145-018 Chain, ” x 56” Drum saddle roller 40-001-097 subassembly Roller subassembly Exploded View provided on p. Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 17 of 20...
  • Page 18 (~25.7 cm) from the top of the fork pockets. NOTE: In order for the Eagle Beak™ mechanism to work properly, the drum and its contents must weigh AT LEAST 50 lb. (~22.7kg). Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 18 of 20...
  • Page 19 (~25.2 cm) from the top of the fork pockets. NOTE: In order for the Eagle Beak™ mechanism to work properly, the drum and its contents must weigh AT LEAST 50 lb. (~22.7kg). Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 19 of 20...
  • Page 20 Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.

This manual is also suitable for:

Fmdl-1Fmdl-2Fmdl-8-lFmdl-11-hDfdl-3

Table of Contents