Fall Alert (Man Down); Radio Alerts When Fall Alert Is Triggered - Motorola APX 3000 User Manual

Hide thumbs Also See for APX 3000:
Table of Contents

Advertisement

68012007043-EM
Chapter 7 : Advanced Features
Procedure:
Once the tone begins to sound, if the orange button is released the tone continues to alarm on all
radios within the talkgroup, until the PTT button is released.
NOTE: Radio does not transmit evacuation tone if the radio is in secure mode.
7.10
Fall Alert (Man Down)†‡
Fall Alert is a supporting feature of the Emergency operation. The Emergency feature must be
programmed for Fall Alert to operate.
Your radio activates the Fall Alert feature when it achieves or exceeds a tilt angle threshold or a
combination of the angle threshold and radio motion below the motion sensitivity level. The radio must
stay in this condition for a programmed period before the Emergency Alarm or Call is activated.
NOTE: Because Fall Alert may be triggered accidentally, consider the following scenarios when
using your radio:
If the radio is programmed to a horizontal position only, it must be worn in a vertical position.
If the radio is programmed with the Fall Alert feature, turn off the radio when charging it with
a wall-mounted charger.
When you dismiss Fall Alert and keep the radio horizontal, no emergency will be sent and
no further Fall Alert notification will occur until the device is rotated back to normal (portrait)
mode.
7.10.1

Radio Alerts When Fall Alert is Triggered

When Fall Alert is triggered, your radio plays an alert tone and the display shows Fall-Alert.
NOTE: If the radio is programmed for Surveillance Mode, it inhibits all tones and lights including
the Fall Alert tones.
Fall Alert Enhanced
Your radio also supports Fall Alert Enhanced where it plays an alert tone for a preprogrammed period.
This tone is louder than the preprogrammed minimum level or the current level of the speaker and it
acts as a beacon that helps to find the radio.
NOTE: The radio plays this alert tone even in Surveillance Mode.
When the alert tone is active, changing to another channel with a different setup triggers a different
response from the radio:
The alert tone is inhibited when you change to a channel without Emergency feature.
The alert tone is inhibited when you change to a channel with Emergency but no Fall Alert feature.
The current alert tone is inhibited and is replaced with a different alert tone when you change to a
channel with Emergency feature and a different Fall Alert configuration.
The alert tone continues when you change to a channel with Emergency and similar Fall Alert
configuration.
52

Advertisement

Table of Contents
loading

Table of Contents