Switching Between Repeater Or Direct Operation Button; Monitor Feature; Monitoring A Channel; Monitoring Conventional Mode - Motorola APX 3000 User Manual

Hide thumbs Also See for APX 3000:
Table of Contents

Advertisement

5.6

Switching Between Repeater or Direct Operation Button

The Repeater Operation increases the radio coverage area by connecting with other radios through
a repeater. The transmit and receive frequencies are different. The Direct or "talkaround operation"
allows you to bypass the repeater and connect directly to another radio. The transmit and receive
frequencies are the same.
Procedure:
Press the preprogrammed Repeater/Direct switch to toggle between talkaround and repeater
modes.
5.7
Monitor Feature†‡
The monitor feature ensures that a channel is clear before transmitting.
The lack of static on a digital channel when the users switch from analog to digital radios is not an
indication that the radio is malfunctioning. Digital technology quiets the transmission by removing the
noise from the signal and allows only the clear voice or data information to be heard.
5.7.1

Monitoring a Channel

Procedure:
Monitoring a Channel using the Monitor button.
a. Press the preprogrammed Monitor button.
The Carrier Squelch indicator appears on the display when you monitor a channel using the
preprogrammed Monitor button.
b. Press and hold the PTT button to transmit.
The LED lights up solid red.
c. Release the PTT button to receive (listen).
5.7.2

Monitoring Conventional Mode

This feature allows you to monitor channel traffic on conventional channels by defeating the coded
squelch. Thus, you can listen to another active user on the channel. This way, you may be prevented
from taking over the conversation of another user.
When and where to use: Your radio may be preprogrammed to receive Private-Line
Procedure:
1 Momentarily press the Monitor button to listen for activity.
The Carrier Squelch indicator appears on the display.
2 Press and hold the Monitor button to set continuous monitor operation.
The duration of the button press is programmable.
3 Press the Monitor button again, or the PTT button, to return to the original squelch setting.
68012007043-EM
Chapter 5 : General Radio Operation
®
(PL) calls.
37

Advertisement

Table of Contents
loading

Table of Contents