Specification; Specifications - SMC Networks ZSE20CF-L Operation Manual

Specification

■Specifications

Product No.
Applicable fluid
Rated pressure range
Display/Set pressure range
Display/Min. setting unit
Proof pressure
Used as switch output device
Used as IO-Link device
Current consumption
Protection
Display accuracy
Repeatability
Analog output accuracy
Analog output linearity
Temperature characteristics
Output type
Output mode
Switch operation
Maximum load current
Maximum applied voltage
Internal voltage drop
(Residual voltage)
∗1
Delay time
Hysteresis mode
Window comparator mode
Short circuit protection
ZSE20C ZSE20CF
(Vacuum (Compound
pressure) pressure)
Fluids which do not corrode SUS630, SUS304
0.0 to -101.0 -100.0 to 100.0
kPa kPa
10.0 to -105.0 -105.0 to 105.0
kPa kPa
0.1 kPa
500 kPa
12 to 24 VDC (±10%), ripple max. 10%
18 to 30 VDC, ripple max.10% (p-p)
Polarity protection
±2%F.S. ±1 digit (at ambient temperature 25±3
±0.2%F.S. ±1 digit
±2.5%F.S. (at ambient temperature 25±3
±3%F.S. (25
Select from NPN or PNP open collector output
Hysteresis mode, window comparator mode, error output,
switch output off
Normal output, reversed output
30 V (during NPN output)
1.5 V or less (Load current 80 mA)
1.5 ms or less, Variable at 0 to 60 s/0.01 s step
Variable from 0
-92-
ISE20C
(Positive
pressure)
-0.100 to 1.000
MPa
-0.105 to 1.050
MPa
0.001 MPa
2 MPa
35 mA or less
o
C)
±1%F.S.
o
C standard)
80 mA
∗2
Provided
No.PS※※-OMX0002
ISE20CH
(Positive
pressure)
-0.100 to 2.000
MPa
-0.105 to 2.100
MPa
4 MPa
o
C)