Table of Contents
Advertisement
Standard features
Simple everyday use
TV Control Button & Operation
Note: The position of the control button may differ
depending on the model.
Your TV has a single control button. This button allows
you to control the Standby-On / Source / Programme
and Volume functions of the TV.
Operating with the Control Button
• Press the control button to display the function options
menu.
• Then press the button consecutively to move the focus
to the desired option if needed.
• Press and hold the button for about 2 seconds to activate
the selected option. The icon colour of the option
changes when activated.
• Press the button once again to use the function or enter
the sub menu.
• To select another function option, you will need to
deactivate the last activated option first. Press and hold
the button to deactivate it. The icon colour of the option
changes when deactivated.
• To close the function options menu do not press the
button for a period of about 5 seconds. The function
options menu will disappear.
To turn the TV off: Press the control button to display the
function options menu, the focus will be on the Standby
option. Press and hold the button for about 2 seconds
to activate this option. The icon colour of the option
changes when activated. The TV will turn off when the
button is released.
To turn on the TV: Press the control button, the TV will
turn on.
To change volume: Press the control button to display
the function options menu and then press the button
consecutively to move the focus to Volume + or Volume
- option. Press and hold the button for about 2 seconds
to activate the selected option. The icon colour of the
option changes when activated. Then press the button
to increase or decrease the volume.
To change channel: Press the control button to display
the function options menu and then press the button
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk. If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
20
Standard features
consecutively to move the focus to Programme + or
Programme - option. Press and hold the button for about
2 seconds to activate the selected option. The icon colour
of the option changes when activated. Then press the
button to switch to the next or previous channel in the
channel list.
To change source: Press the control button to display
the function options menu and then press the button
consecutively to move the focus to Source option. Press
and hold the button for about 2 seconds to activate this
option. The icon colour of the option changes when
activated. Then press the button once again to display
the sources list. Scroll through the available sources by
pressing the button. TV will automatically switch to the
highlighted source.
Note: Main menu OSD cannot be displayed via the
control button.
Operation with the Remote Control
Press the Home button on your remote control to display
main menu. Use the directional buttons and OK button
to navigate and set. Press Back/ Return or Home button
to quit a menu screen.
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources. Press the
Source button on your remote control consecutively to
select the different sources.
Changing Channels and Volume
You can change the channel and adjust the volume by
using the Programme +/- and Volume +/- buttons on
the remote.
Forced Standby
If your TV stops responding to commands, you can
perform forced standby which will terminate the process.
In order to do this, press and hold the Standby button on
remote controller for about 5 seconds.
Using Main TV Menu
When the Home button is pressed, the main TV menu
will appear on the screen. You can navigate through the
menu items using the directional buttons on the remote.
To select an item or see the sub-menu options of the
highlighted menu press OK button. When you highlight a
menu option some of the sub-menu items of this menu
may appear on the upper side of the menu bar for quick
access. To use a quick access item highlight it, press OK
and set as desired using the Left/Right directional buttons.
When finished press OK or Back/Return button to exit.
Press Exit button to close the main menu.
Advertisement
Table of Contents
