Settings Menu Contents - Bush DLED50UHDHDRSA Instruction Manual

Advanced features
Getting the most from your TV

Settings Menu Contents

Picture Menu Content
Mode
Contrast
Brightness
Sharpness
Colour
Energy Saving
Backlight
Picture Zoom
Picture Shift
Tru HDR
Advanced Settings
Dynamic Contrast
Colour Temp
White Point
Tru Blue
Tru Micro Dimming Low, Medium, High and Off options are available. While Tru Micro Dimming is active,
Noise Reduction
Tru Contour
Tru Flow
Tru Flow Demo
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk. If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
28 Advanced features
You can change the picture mode to suit your preference or requirements. Picture
mode can be set to one of these options: Cinema, Game(optional), Sports, Dynamic
and Natural.
Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision
Bright picture mode options will be available instead of Cinema and Natural modes.
Adjusts the light and dark values on the screen.
Adjusts the brightness values on the screen.
Sets the sharpness value for the objects displayed on the screen.
Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto, Screen
Off or Off. Note: Available options may differ depending on the selected Mode.
This setting controls the backlight level. The backlight function (will be located under
the Energy Saving setting) will be inactive if the Energy Saving is set to an option other
than Custom.Highlight and use Left/Right directional buttons to set.
Sets the desired image size format.
This option (will be located under the Picture Zoom setting) may be available depending
on the Picture Zoom setting. Highlight and press OK, then use directional buttons to
shift the picture upwards or downwards.
Virtual HDR function that manipulates colour, saturation and dynamic contrast, basically
converts Standard Dynamic Range picture to High Dynamic Range picture. Set as On
to enable.
You can change the dynamic contrast ratio to desired value.
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options
are available.
If the Colour Temp option is set as Custom, this setting will be available (will be located
under the Colour Temp setting). Increase the 'warmth' or 'coolness' of the picture by
pressing Left or Right buttons.
White colour enhancement function that makes white colour more cooler in order to
make more bright picture. Set as On to enable.
it will enhance contrast locally for each defined zone.
If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce
the amount of noise.
Low, Medium, High and Off options are available. While Tru Contour is active, it will
decrease the contour effects in low resolution content and auto streaming services.
Press left/right buttons to set Tru Flow to Low, Medium, High or Off. While Tru Flow
is active, it will optimise the TV's video settings for motional images to acquire a better
quality and readability.
When Tru Flow option is set to Low, Medium or High, this option will be available (will
be located under the Tru Flow setting). Press OK button to activate the demo mode.
While demo mode is active, the screen will be divided into two sections, one displaying
the Tru Flow activity, the other displaying the normal settings for TV screen. Press OK
button again to cancel.