Zone Tamper Report Codes; System Set / Unset Reporting Codes; User Set Reporting Codes - Pyronix ATLAS 8 Installation Instructions Manual

11.16.2 Zone Tamper Reporting Codes
HQWHU VHTXHQFH
Enter
pressing the key in place of the two digits.
Examples
To use HEX codes, use the
Reporting codes are automatically stored after the 16th key press.

11.16.3 System Set / Unset Reporting Codes

HQWHU VHTXHQFH Enter 2 digits for each of the system set / unset reporting codes. To disable an event
Enter
insert blanks by pressing the
Examples
To use HEX codes, use the
Reporting codes are automatically stored after the 14th key press.

11.16.4 User Set reporting codes

HQWHU VHTXHQFH
Enter
blanks by pressing the
Examples
To use HEX codes, use the
Reporting codes are automatically stored after the 14th key press.
Page 24
followed by 2 digits for each tamper zone. To disable an event insert blanks by
Tamper zone 1
Tamper zone 2
Tamper zone 3
Tamper zone 4
Tamper zone 5
Tamper zone 6
Tamper zone 7
Tamper zone 8
key to select the character required and the
key in place of the two digits.
Set A
Set B
Set C
Set D
Duress Set
Duress Unset
Confirmed alarm code
key to select the character required and the
Enter 2 digits for each of the user set reporting codes. To disable an event insert
key in place of the two digits.
Set User 1
Set User 2
Set User 3
Set User 4
Set User 5
Set User 6
Set User 7/Keyswitch
key to select the character required and the
key to accept.
key to accept.
key to accept.