Advertisement
11. INSTALL COAT HOOK & HANDLE ON DOOR
• Drill at dimple located inside at top of door frame using #10 or (3/16") DRILL BIT.
• Align Coat Hook #10891 hole with hole drilled on inside at top of door frame.
• Rivet coat hook to door frame using Rivet #22604.
• Drill 6 holes on inside of door for hover handle (oval area). Take care to only drill
the first wall of door.
• Align holes in Handle #22522 with holes on door.
• Rivet handle to door using (6) Rivets #22604.
Dimple for coat hook
• Peel protective coating from mirror
24
23
22
23
(6)
2530 Xenium Lane North, Minneapolis, MN 55441
Telephone: 763-553-1900
Fax: 763-553-1905
800-328-3332 / www.satelliteindustries.co
10-5-21
REV A
24048 INSTRUCTION- ASPEN II
14
Advertisement
