Satellite ASPEN II Assembly Instructions Manual page 13

10. INSTALL HANDLE (Door Latch) ON DOOR
• Place Handle #40057 on inside of door (recessed area).
• From outside door insert screw #40052 (3-1/2") with washer #11360 in hole in door
through hole in handle on inside of door.
• Place washer #12382 & nut #16307 on screw into recess of handle.
• Tighten screw/nut using #2 Phillips Head Driver Bit & 7/16" HEX NUT DRIVER or DRIVER BIT.
• DO NOT OVER-TIGHTEN Tighten screw/ nut so handle is snug & not so loose that it
could fall to closed position.
18
20
14
19
13
10-5-21 REV A 24048 INSTRUCTION- ASPEN II 13