Satellite ASPEN II Assembly Instructions Manual page 10

7. INSTALL SHELF & VENT PIPE
• Slide shelf #23832 on vent pipe #14133 with flat surface up.
• Push Vent Pipe #14133 up through roof and pull down into collar of tank vent hole (flat surface
of shelf facing up).
• Install (1) Screw #18098 into dimple on tank collar through vent pipe wall using #2 PHILLIPS
DRIVER BIT. Be sure the screw penetrates the vent pipe to hold it securely.
• Locate shelf on vent pipe up 40 inches from top of tank to top flat surface of shelf. Shelf should
be centered with rear corner of unit.
• Transfer drill through 2 pre-drilled holes in bottom of shelf collar (left & right side) into vent pipe
using #10 or (3/16") DRILL BIT.
• Rivet shelf with (2) Rivets #22604.
TWIST & PUSH
10
10-5-21 REV A 24048 INSTRUCTION- ASPEN II
9
23
(2)
25
10