GCC Technologies J5 Series Maintenance Manual page 57

Version : 9.0
Step3: Plug USB cable to computer, select a desired firmware and port on "Uploader.exe"
dialogue box, then press "START" for uploading.
1
2
Firmware and Uploader can be downloaded from GCC website:
http://gccf.gcc.com.tw/distributor/login.aspx
Step4: When firmware is updated completely, LCM will show as below, then "factory default" the
machine
Step 5: Machine off line and press "tool select", use arrow key to select "Factory Default" then
press enter. Re-power on when default complete.
57