Defender EL00019 Instructions

Window shock alarm

WINDOW SHOCK ALARM

Electronic Security System for Windows

Introduction

The Window Shock Alarm is a convenient, easily to use alarm designed to increase the safety of your

home. The alarm is intended to provide both a visible deterrent by the use of an adhesive warning sticker

and an audible deterrent should there be an attempted forced entry.

Using the double sided adhesive sticker mount the Window Shock Alarm on the glass of the

window (or door) to be protected.

To arm the unit toggle the switch to the "Hi" or "Lo" position. "Hi" position provides a greater

sensitivity for a large window. "Lo" position is more suitable for a small window.

To test, gently knock on the window in several places. The Window Shock Alarm will sound.

When testing, a cloth can be used to cover the alarm siren to reduce the risk of hearing damage.

solonsecurity.co.uk

Product Code: EL00019

Table of Contents

Do you have a question about the EL00019 and is the answer not in the manual?

Page 1 WINDOW SHOCK ALARM Electronic Security System for Windows Product Code: EL00019 Introduction The Window Shock Alarm is a convenient, easily to use alarm designed to increase the safety of your home. The alarm is intended to provide both a visible deterrent by the use of an adhesive warning sticker and an audible deterrent should there be an attempted forced entry.
Page 2 Battery test and replacement It is recommended that the alarm is tested regularly. If the alarm sounds weak, the batteries should be replaced. Toggle the switch to “Hi” or “Lo” Push the test button on the front of the Window Shock Alarm. If the red light illuminates, the batteries are still good.