Stopping Status; Start Failure Status - Atlas Copco PTS 1600 Cud S3A/T3 APP Instruction Manual

5.4.10 Stopping status

S Warnings R Are shown on the screen
A Shutdowns R To shutdown status (see
section 5.4.12)
A Stopping procedure has R If manual start:
ended To Ready for Start status
(see section 5.4.2)
If automatic start:
To Standby status (see
section 5.4.3)
If Power OFF:
End of operation
A Emergency Stop button R To emergency Stop
status (see section 5.4.13)
A ↓-button, press once
R Set pressure - 0.1 bar
A ↑-button, press once
R Set pressure + 0.1 bar
A ↓-button, press
R Set pressure - 0.1 bar/
continuously second
A ↑-button, press
R Set pressure + 0.1 bar/
continuously second
Other actions and signals have no effect in this status.

5.4.11 Start failure status

First a stopping procedure is executed, and the
operator has to wait.
Sreen A: Start failure, origin in Permissive start
status.
- 46 -
Sreen B: Start failure, origin in Cranking status.
S Warnings R Are shown on the screen
A Emergency Stop button R To emergency Stop
status (see section 5.4.13)
A ↓-button, press once
R Set pressure - 0.1 bar
A ↑-button, press once
R Set pressure + 0.1 bar
A ↓-button, press
R Set pressure - 0.1 bar/
continuously second
A ↑-button, press
R Set pressure + 0.1 bar/
continuously second
A Power OFF switch R End of operation
A Reset button R To Ready for Start status
(see section 5.4.2)
Other actions and signals have no effect in this status.