Table of Contents
Advertisement
1
Manually unscrew the lock nuts on the feet.
2
Adjust the feet until the machine is level and balanced.
3. Tighten all pipe nuts by hand.
4.1.7 Electrical connection
Connect the machine to a socket equipped with an earth connection and protected by a 16 A
fuse. Our company cannot be held responsible for damage resulting from the use of the
appliance without an earth connection in accordance with local regulations. .
• The connection must comply with the regulations in force in your country.
• The wiring of the electrical output circuit must be able to meet the requirements of the
appliance. It is recommended to use a ground fault circuit interrupter (GFCI).
• The power cable socket must be easily accessible after installation.
• If the current rating of your home fuse or circuit breaker is less than
16 amps, have a qualified electrician install a 16 amp fuse.
• The voltage specified in the "Technical data" section must be equal to that of
your electrical network.
• Do not make connections using extension cords or multiple sockets.
B
CAUTION :
Service.
4.1.8 Initial use
VS
Use an anti-limescale suitable for washing machines.
There may be water left in your machine as a result of quality assurance processes carried out during
production. This does not affect your machine.
10 / EN
Damaged power cables must be replaced by the Authorized
Before starting to use the product, make sure that all
preparations are carried out in accordance with the
instructions in the sections "Important safety and
environmental instructions" and "Installation". To
prepare the machine for washing laundry, perform the
first operation in the Drum cleaning programme. If this
program is not available on your machine, apply the
method described in section 4.4.2.
Washing machine / User manual
Advertisement
Table of Contents
