Related Manuals for Beko WTV9716XBWST
Summary of Contents for Beko WTV9716XBWST
- Page 1 Washing machine User Manual WTV9716XBWST Document number: 2820529911_FR/ 09-12-21.(15:39)
-
Page 2: General Safety Instructions
General safety instructions This section includes safety instructions that will help protect you against the risk of personal injury or property damage. Failure to follow these instructions will void any warranty. 1.1 Safety of people and property Never install the machine on a carpeted floor. Otherwise, the lack of air circulation below your machine will cause electrical parts to overheat. -
Page 3: Child Safety
Do not open the locked door by force. The door opens immediately at the end of the wash cycle. If the door does not open, apply the solution suggested for the failure "Unable to open the loading door" in the Troubleshooting section. -
Page 4: Electrical Safety
1.3 Electrical safety If the device breaks down, do not use it unless it has been repaired by the authorized service agent. You will expose yourself to the risk of electric shock! This device has been designed to resume operation in case of energization after a power cut. -
Page 5: Important Instructions For The Environment
Important instructions for the environment 2.1 Compliance with the WEEE Directive This product complies with the European WEEE Directive (2012/19/EU). This product bears a classification symbol for Waste Electrical and Electronic Equipment (WEEE). This machine was made with high quality parts and materials that can be reused and recycled. -
Page 6: Technical Characteristics
Technical characteristics Beko Supplier's name or trademark WTV9716XBWST Model name 7158145200 Maximum mass of dry laundry (kg) 1400 Maximum spin speed (rpm) Integrable Maximum load of dry laundry (kg) Height (cm) Width (cm) Depth (cm) Single water inlet / Double water inlet •... - Page 7 4.1 Setup During installation, when you power on the product for the first time, the calibration mode* must be started. Calibration mode allows the machine to correctly detect the amount of laundry loaded. To activate the calibration mode, the Drum Clean** program must be selected and the spin speed option must be cancelled.
-
Page 8: Connecting The Water Supply
4.1.2 Removal of conditioning reinforcements Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging backing by pulling on the tape. Do not perform this operation yourself. 4.1.3 Removing transport locks 1 Unscrew all bolts using a suitable wrench until they turn freely. Remove the security screws by gently turning them. -
Page 9: Connecting The Exhaust Duct
Tighten the pipe nuts by hand. Never use a tool to tighten these nuts. After the pipe connection is complete, check for leaks at the connection points by fully opening the taps. If you find any leaks, close the valve and remove the nut. Tighten the nut carefully after checking the seal. -
Page 10: Electrical Connection
Manually unscrew the lock nuts on the feet. Adjust the feet until the machine is level and balanced. 3. Tighten all pipe nuts by hand. 4.1.7 Electrical connection Connect the machine to a socket equipped with an earth connection and protected by a 16 A fuse. - Page 11 4.2 Preparation 4.2.1 Sorting laundry • Sort the laundry by type of fabric, colour, degree of soiling and permissible water temperature. • Always follow the instructions on the labels of your clothes. 4.2.2 Preparing laundry for washing • Items with hardware such as underwired bras, belt buckles or metal buttons will damage the machine.
- Page 12 • Do not use prewash and high temperatures for lightly soiled laundry. • If you plan to dry your laundry in a dryer, select the highest recommended spin speed during the washing process. • Do not use more detergent than the amount recommended on the package. 4.2.4 Load laundry 1.Open the loading door.
- Page 13 Choosing the type of detergent The type of detergent to use depends on the washing programme, the type and the color of the fabric. • Use different detergents for colored laundry and white laundry. • For your delicate clothes, use only the suggested programs and special detergents (liquid detergent, wool shampoo, etc.) intended only for delicate clothes.
- Page 14 If the product is equipped with a liquid detergent part: • To use liquid detergent, press the indicated point to turn the appliance. The falling part will act as a barrier for the liquid detergent. • If necessary, clean the device with water when it is in place or when removing it. •...
- Page 15 • When using hydrogen bleach, select a low temperature laundry washing program. • Oxygen bleach can be used simultaneously with detergent. However, if the consistency is not the same as the detergent, first pour the detergent into compartment no. "2" in the detergent drawer and wait until the detergent flows during the water inlet in the machine.
-
Page 16: Operation Of The Device
4.3 Operation of the device First, please read the "Safety Instructions" section! 4.3.1 Control panel 1 - Program selector 7 - End time adjustment button 8 - 2 - Temperature level indicators Auxiliary function button 3 9 - Auxiliary 3 - Spin level indicators 4 - function button 2 10 - Auxiliary function Display button 1 11 - Spin speed adjustment... - Page 17 4.3.3 Table of programs and consumption optional function Range Program temperature °C selectable 2.65 1400 • • • • • Cold - 90 1.90 1400 • • • • • Cold - 90 Cotton 1.10 1400 • • • • •...
-
Page 18: Program Selection
Please check the installation section of the user manual before using your product for the first time. The auxiliary functions contained in the table may vary depending on the model of your machine. Water and energy consumption may vary depending on fluctuations in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, as well as variations in electrical voltage. - Page 19 4.3.5 Programs • Eco 40-60 The Eco 40-60 program is used to clean normally soiled cotton laundry washable at 40°C or 60°C, together in the same cycle. In addition, this program is used to assess compliance with EU Ecodesign legislation. Although it lasts longer than all other programs, it allows great energy and water savings.
- Page 20 • Comforter Use this program to wash your fiber duvets bearing the "machine washable" label. Check that you have loaded the duvet correctly so as not to damage the machine and the linen. Remove the duvet cover before loading the duvet into the machine. Fold the duvet in half and load it into the machine.
- Page 21 • Xpress / SuperXpress Use this program to wash your lightly soiled and stain-free cotton laundry in a short time. The program duration can be reduced up to 14 minutes when the quick wash function is selected. When the quick wash function is selected, the amount of laundry to be washed should not exceed 2 (two) kg.
- Page 22 Below are the soil levels that can be selected using the "Quick wash" setting button. When you select When you press When you press on the "Wash" button on the "Wash" button the “Washing” function fast " fast » once fast »...
-
Page 23: Spin Speed Selection
4.3.6 Temperature selection Each time a new program is selected, the recommended temperature for that program appears on the temperature indicator. The recommended temperature may not be the maximum temperature that can be selected for the current program. Press the button againtemperature adjustment buttonto change the temperature. - Page 24 If you want to drain the water at the end of the program without spinning, use the function No spin. No changes can be made to these programs if they do not allow adjustment of the spin speed. You can change the spin speed after the start of the wash if the wash steps allow it.
- Page 25 4.3.8.1 Auxiliary functions • Prewash A pre-wash is only useful if the laundry is very dirty. Not using the pre- wash will save energy, water, detergent and time. • Express+ After selecting a programme, you can press the Quick wash setting button to shorten the duration of the programme.
- Page 26 4.3.8.2 Functions/Programs selected by pressing and holding the button for 3 seconds • Drum cleaning Press the auxiliary function button for 1-3 seconds to select the program. Use this program on a regular basis (once every 1-2 months) to clean the drum for more hygiene.
- Page 27 • Child safety Use the Child Lock function to prevent children from playing with the machine. This way you can avoid changes while a program is running. You can switch the washing machine on and off by pressing the On/Off button when Child Lock mode is activated.
- Page 28 4.3.9 End time Time display The time remaining until the end of the program when it is in progress is displayed in the hours-minutes format below “01:30”. The duration of the program may vary according to the values presented in the "Table of programs and consumption"...
-
Page 29: Loading Door Lock
4.3.10 Starting the program 1 Press the buttonDeparture pauseto start the program. 2 The button lightDeparture pausewhich was off now lights up continuously, which which indicates the start of the program. 3 The loading door is locked. The locked door symbol is displayed on the screen after the loading door is blocked. - Page 30 • Turn off and unplug the device. • Open the pump filter cover. • Remove the loading door emergency handle behind the filter cover using a tool. • Open the loading door by pulling the loading door emergency handle down. •...
- Page 31 Switch the machine to pause mode: Press the Start/Pause buttonto put the machine in pause mode. The Pause symbol flashes on the screen. Change program selections after program launch: Program modification is allowed when the current program is running unless the Child Lock is activated.
- Page 32 4.3.15 HomeWhiz and remote control functions The HomeWhiz function allows you to use your smart device to check your washing machine and get status information. With the HomeWhiz app, you can use your smart device to perform different operations that can also be performed on the machine.
- Page 33 • When the machine is in HomeWhiz configuration mode, an animation will appear on the screen and the Bluetooth icon will flash until the machine is paired with the smart device. Only the program button will be active in this mode. The other buttons will be inactive.
- Page 34 4.3.15.3 Remote control function and use of this function After HomeWhiz setup, Bluetooth is automatically enabled. To enable or disable the connection via Bluetooth, please refer to section 4.3.8.2 Bluetooth 3”. If you turn your machine off and on again while Bluetooth is active, it will reconnect automatically.
- Page 35 Once you activate this function on the washing machine, it will remain activated except for certain conditions and will allow you to control your washing machine remotely via Bluetooth. In some cases, it disables itself for security reasons: • When your washing machine is subject to a power cut. •...
- Page 36 4.4 Maintenance and cleaning The life of the device increases and frequently encountered problems will be reduced if it is cleaned at regular intervals. 4.4.1 Cleaning the detergent drawer Clean the detergent drawer at regular intervals (every 4 to 5 wash cycles) as shown below, to prevent powder detergent buildup over time.
-
Page 37: Cleaning The Water Inlet Filters
4.4.4 Cleaning the water inlet filters A filter is located at the end of each water inlet valve, located on the back of the machine and at the end of each water inlet hose, where they connect to the tap. These filters prevent foreign bodies and dirt in the water from and wash-linen ge. - Page 38 2.Open the filter cap. drain the water. emptying in case of emergency, proceed as follows Remove the emergency drain hose from its housing Put a large container at the end of the hose. Drain the water in the pan by removing the plug at the end of the hose.
- Page 39 Diagnostic First, please read the "Safety Instructions" section! Problem Cause Solution • Press the Start/Pause/Cancel You have not pressed the Start/Pause/ The programs do not button. Cancel button. can't start after closing the • Reduce the amount of laundry and In case of excessive loading, it will be make sure the loading door is difficult for you to close the loading door.
- Page 40 Problem Cause Solution The door lock is activated due to the The door does not open. • Drain the water from the machine by water level in the machine. running the Pump or Spin programme. The machine is heating the water or is in •...
- Page 41 Problem Cause Solution The machine may contain an • An unbalanced load automatic The machine does not unbalanced load. detection system is activated due to switch to the spin phase. (*) uneven distribution of laundry in the drum. • Check the filter and the drain hose. The washing machine does not spin if the water has not been completely drained.
- Page 42 Problem Cause Solution The amount of detergent, brand, The rinsing capacity of the • Use an appropriate detergent for the and storage conditions used are not washing machine and your laundry. Store washing machine is low. appropriate. closed detergents in a humidity-free environment and avoid exposing them to excessive temperatures.
- Page 43 Problem Cause Solution An excessive amount • Use a detergent suitable for the You have used an inappropriate detergent for the foam forms in the washing machine. washing machine. machine. (**) The amount of detergent used is • Use only a sufficient amount of excessive.
- Page 44 In addition, to ensure product safety and to avoid the risk of serious injury, said self-repair must be carried out following the instructions in the user manual for self-repair or those available onsupport.beko.com. For your safety, unplug the device before attempting any self-repair.