Table of Contents
Advertisement
Switch the machine to pause mode:
Press the Start/Pause buttonto put the machine in pause mode. The Pause
symbol flashes on the screen.
Change program selections after program launch: Program modification is
allowed when the current program is running unless the Child Lock is
activated. This action will cancel the current program.
VS
The selected program starts again.
Change auxiliary function, speed and temperature
Depending on the phase reached by the program, you can cancel or activate the
auxiliary functions. See "Selection of auxiliary functions"
You can also change the speed and temperature settings. See the points
"Speed selection" and "Temperature selection".
VS
The loading door will not open if the temperature of the water in the machine is high or if
the water level is above the base of the loading door.
4.3.13 Canceling the program
The program is canceled when the program selection knob is turned to a
different program or when the machine is switched off and back on using
the program selection knob.
VS
If you turn the program selection knob while Child Lock is activated, the
program will not be cancelled. You must first cancel Child Lock.
If you want to open the loading door after canceling the program but this opening is
not possible since the water level in the machine is above the base of the door, turn the
program selector to the program " Spin and Pump" and drain the water in the machine.
4.3.14 End of program
The End symbol appears on the screen when the program is finished.
If you don't press any button for 10 minutes, the machine goes into OFF
mode. The screen and all indicators are off.
The completed program phases are displayed if you press the Start/Stop button.
31 / EN
Washing machine / User manual
Advertisement
Table of Contents
