Table of Contents
Advertisement
Once you activate this function on the washing machine, it will remain activated except for
certain conditions and will allow you to control your washing machine remotely via
Bluetooth.
In some cases, it disables itself for security reasons:
• When your washing machine is subject to a power cut.
• When the program knob is turned and a different program is
selected or the appliance is switched off.
4.3.15.4 Troubleshooting
Take the following actions if you encounter a command or connection
problem. Observe whether or not the issue persists after the operation
you performed. Proceed as follows if the problem is not solved.
• Check if your smart device is connected to the correct home network.
• Restart the product application.
• Disable Bluetooth and re-enable it through the User Control Panel.
• If the connection could not be established after the above operations, repeat the initial
configuration procedure on your washing machine.
If the problem persists, contact an authorized service agent.
35 / EN
Washing machine / User manual
Advertisement
Table of Contents
