Table of Contents
Advertisement
2.Open the filter cap.
are
a
a
4. Clean any residue inside the filter, as well as fibers, if any, around the
impeller area.
5. Replace the filter.
6.If the filter cap has two pieces, close it by pressing the tab. If, on the
other hand, the device includes a part, first install the labels in their
locations in the lower part, then press the upper part to close.
38 / EN
drain the water.
emptying in case of emergency, proceed as follows
at
Remove the emergency drain hose from
its housing Put a large container at the
b
end of the hose. Drain the water in the pan
by removing the plug at the end of the
hose. When the container is full, block the
outlet of the hose by replacing the cap.
After emptying the container, repeat the
above operation to completely empty the
water from the machine.
vs
At the end of the water drain, close the
end again by the socket and fix the hose
in place.
d
Twist and remove the filter from the pump.
Washing machine / User manual
Advertisement
Table of Contents
