General Information - Trane TTV Installation Operation & Maintenance

General Information

This manual covers the installation, operation and maintenance
of the Trane TTV DX Fan Coil. These new air handler models
are completely designed to incorporate a single slab coil
assembly, improved application flexibility, servicing and
maintenance accessibility and an improved accessory line.
TTVs are of the fully vertical discharge type. They are shipped
in the vertical position.
Note: "Warning" and "Caution" appear at appropriate places
in this manual. Your personal safety and the proper operation
of this machine require that you follow them carefully. The
manufacturer assumes no liability for installations or servicing
performed by unqualified personnel.
Handling
The unit will be supplied within shipping base and protective
packaging over the unit casing. The packaging should be kept
on the unit during handling or storage on site.
If it is necessary to remove the packaging for inspection prior
to completion of on site handling, retain packaging parts and
reapply them by tapping in position to prevent damage to the
casing. TTVs are supplied with a shipping base which is suitable
f or handling by a fork lift truck. If it is necessary to sling the
unit, use spreader bars under the shipping base, ensure that
ropes do not cause abrasion to the surface of the unit.
Foreword
These instructions do not attempt to cover all variations in
systems, nor to provide for every possible contingency to be
met in connection with installation. Should further information
be desired or should particular problems arise which are not
sufficiently covered for the purchaser's purpose, the matter
should be referred to the manufacturer.
TTV-IOM-R410A
Warranty
Warranty is based on the general terms and conditions of the
Trane Company. The warranty is void if the equipment is
repaired or modified without the written approval of the
manufacturer, if the operating limits are exceeded or if the
control system or the electrical wiring is modified. Damage
due to misuse, lack of maintenance or failure to comply with
the manufacturer's instructions or recommendations is not
covered by the warranty obligation.
Reception
On arrival, inspect the unit before signing the delivery note.
Specify any damage on the delivery note, and send a registered
letter of protest to the last carrier of the goods within 72 hours
of delivery. Notify the local Trane Sales Office at the same
time. The unit should be totally inspected within 15 days of
delivery. If any concealed damage is discovered, stop,
unpacking the shipment. Take photos of the damage material
if possible. Notify the Carrier immediately by phone and
registered mail. Notify the local Trane Sales Office. Concealed
damage must be reported within 15 days delivery. Check the
unit nameplate to confirm that the proper unit was shipped.
Available power supply must be compatible with electrical
characteristics specified on component nameplates.
5