Advertisement
Unpacking: Thank you for purchasing this product. Every model has been
thoroughly tested and has been shipped in perfect operating condition.
Carefully check the shipping carton for damage that may have occurred during
shipping. If the packaging appears to be damaged, carefully inspect your product
for any damage and be sure all equipment necessary to operate the unit has
arrived intact.
Introduction: This product has six DMX channels. It can operate in three
different modes: DMX control, sound-active, or in a master/slave configuration.
This product comes with several built-in programs that can be used, while
operating as a dimmer unit or when used in multiples linked in a master/slave
configuration. For best results, use in conjunction with fog or special effects
machines to enhance the beam projections.
Warning! To prevent or reduce the risk of electrical shock or fire, do not expose
this unit to rain or moisture.
Warning! Avoid looking directly into the light source at all times! This may
cause severe eye damage.
Installation
1. The light can be installed anywhere, but the light must be at a distance of 1m
minimum from people or other objects at all times. Please make sure the light is
fixed steadily; moreover, the product should be earthed.
2. Please make sure the rated voltage and frequency suit your local voltage.
3. DMX512 connection：The DMX512 signal of the controller is connected
through the Input and Output 3pins XLR light sockets. (1 Earth, 2 Negative,
3 Positive)
The length of the signal cable should be less than 100m in order to avoid
interference. The light will work according to the IP Code which you selected
when you are using the DMX512 controller control equipment. Please refer to
the pictures below.
Advertisement
