Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 45055-01
20090605
©2009 Hunter Fan Co.
Type 2 Models
Type 2 Models
Type 2 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hunter 45055-01
Summary of Contents for Hunter 45055-01
- Page 1 For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 45055-01 20090605 ©2009 Hunter Fan Co. Type 2 Models Type 2 Models Type 2 Models Owner’s Guide and Installation Manual...
-
Page 2: Table Of Contents
8 • Operating and Cleaning Your Ceiling Fan ....... 15 9 •... - Page 3 Understanding Mounting and Installer’ s Choice® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include instructions for all three Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Hanger Bracket
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 3” Screw 45055-01 • 06/05/09 • Hunter Fan Company Isolator Hanger Bracket Ceiling Peak Ceiling Peak... -
Page 6: Assembling And Hanging The Fan
3-1 – 3-3. For low profile mounting (ceilings less than 8 feet high), go to steps 3-6 – 3-9 on the next page. 3-1. To assemble fan to hang down from a flat or angled ceiling, place the canopy and canopy trim ring around the adapter so that they rest on the fan assembly. - Page 7 3-9. Align the screw holes in the washer with the holes in the adapter. Assemble securely with three #8-32 x 3/4” screws. 3-10. Raise the fan and place the hook on the hanger bracket through the round hole in the rim of the canopy.
-
Page 8: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 45055-01 • 06/05/09 • Hunter Fan Company 4 •Wiring the Fan Wire... -
Page 9: Installing The Canopy And Canopy
Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counter clockwise until it releases from canopy. Step 5-5 45055-01 • 06/05/09 • Hunter Fan Company Steps 5-1 – 5-2 Canopy Step 5-4 Canopy Screw... -
Page 10: Assembling The Blades
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. -
Page 11: Completing Your Installation With Or Without A Bowl Light Fixture
7 • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. - Page 12 Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws. 45055-01 • 06/05/09 • Hunter Fan Company Steps 7-6 – 7-7 Lower Switch...
- Page 13 (You may find the plastic breakaway connector on the end of the extra chain.) 7-10. Thread the fan pull chain through the hole in the metal disk. Then, thread the fan pull chain through the hole in the center of the glass bowl.
- Page 14 7-21. Once you have uninstalled the light fixture, continue with Step 7-1. Male Dummy Terminal Female Dummy Terminal 45055-01 • 06/05/09 • Hunter Fan Company Lower Switch Housing Threaded Rod Steps 7-15 – 7-18 Plug Button Step 7-20...
-
Page 15: Fan
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings. -
Page 16: Troubleshooting
1. Check to make sure the wattage and type of light bulbs installed match the specifications on the light socket. 45055-01 • 06/05/09 • Hunter Fan Company 9 • Troubleshooting If you need parts or service assistance, please call...
Need help?
Do you have a question about the 45055-01 and is the answer not in the manual?
Questions and answers