Completing Your Installation - Hunter 42797-01 Owner's Manual And Installation Manual

9-1. Partially install two light kit fitter screws into the light kit
mounting plate.
9-2. Thread the plug connector from the fan through the light kit fitter.
9-3. Align the keyholes in the light kit fitter with the two partially
installed screws and rotate to engage the screws in the narrow
ends of the keyholes.
9-4. Install the remaining screw to secure the light kit fitter to the light
kit mounting plate. Securely tighten all three screws.
9-5. Connect the 2-pin plug connector from the fan to the 2-pin plug
connector from the ballast.
9-6. Attach the ballast to the light kit fitter with two ballast screws.
9-7. Install the included 22 Watt fluorescent bulb into the hooks on
the fitter.
9-8. Connect the 4 pin plug from the ballast to the fluorescent bulb.
9-9. Place the glass globe into the globe trim band. Align the three
holes in the trim band with the three holes in the fitter. Install and
securely tighten all three screws.
9 • Completing Your Installation
13
42797-01 • 11/13/08 • Hunter Fan Company
Steps 9-1 – 9-8
Light Kit
Fitter
Fluorescent
Bulb
Globe
Trim
Band
Step 9-9
Ballast
Glass
Globe