Rapid Shape D50+ Translation Of The Original Operating Instructions page 2

Operating Instructions D50+ | P50+ | SHERAprint 50
In General
Rapid Shape Customer Service
Rapid Shape GmbH │ DOCR000438
These operating instructions enable the safe and efficient use of the 3D
Printing System. The operating instructions are part of the product and
must be kept accessible to the personnel in its immediate vicinity at all
times.
Personnel must carefully read and understand these instructions before
starting any work. Compliance with the safety instructions and handling
instructions specified in this manual is the prerequisite for safe working
practices.
In addition, the local health and safety regulations and general safety
regulations apply to the area of application of the machine.
Redistribution and duplication of this document, utilization and
communication of its contents are strictly prohibited unless expressly
permitted. Violations oblige to compensation.
After the editorial deadline of this documentation, the product may
have changed. We expressly reserve the right to make any changes to
the product.
The original operating instructions were created in German.
Our general terms and conditions apply.
© All rights belong to Rapid Shape GmbH.
These instructions are valid for the following models:
– D50+
– P50+
– SHERAprint 50
Phone: +49 (0)7033 309 878-42
Email: service@rapidshape.de
2 │ 96