Important Notes - Rehau RAUTOOL A-LIGHT2 Product Instructions

RAUTOOL A-LIGHT2

IMPORTANT NOTES

RAUTOOL A3 Strichzeichnungen, MAM-Bezeichnungen Korrekturexemplar 2 vom 20.05.2010
NOTICE:
Adhere to these instructions to reduce risk of property damage.
CAUTION!
Do not touch
moving parts. Touching
moving parts could cause
fingers to become trapped.
ZGT_07723
When using an expander bit,
check to make sure that the
seating (fully inside the jaws) and
clamping action of the bit in the
jaws is correct (to avoid falling
out).
NOTICE: To avoid damage to the tool, do not expand the pipe under bending stress.
Expanding tool and pipe axis
ZGT_07724
must be identical in the ex-
pansion area (approx. three
compression-sleeve lengths). If
necessary, re-adjust the pipe by
bending.
Never work with a damaged
expander head as this will dam-
ZGT_07707 - muss im Layoutprogramm durchgestrichen werden!
age the pipe. Replacements are
available from your local REHAU
representative.
1
Always apply clamping jaws or
jointing technique at right angles,
making sure they completely
contact the entire surface.
Make sure the fitting is correctly
seated in the tool. Applying the
tool to the wrong fitting collar will
over-compress the joint.
Always insert the expanding tool
into the pipe up to the stop.
Do not tilt the expanding tool.
Regularly grease the expander
taper using tube of lubricant
supplied with the tool. To avoid
excess grease entering the pipe,
do not grease the taper to much.
Note: To avoid damage to pipe,
do not grease expander seg-
ments in contact with pipe.
13